[OpenFOAM] Plot the whole cylinder from a wedge data

hsieh · February 10, 2007, 15:50

Dear Paraview experts:

I ran an axi-symmetric case (wedge). Is it possible to plot the whole cylinder from the wedge data?

Thanks!

Pei

gschaider · February 12, 2007, 07:51

In principle yes, but it's not that easy.

It depends on what you want.

- One possibility is to use clever combinations of the Transform and the Group Filter
- The other possibility is the RotationalExtrusion-Filter (but this one works only on "line-like" objects (for instance an iso-surface on a plane)

hsieh · February 13, 2007, 10:30

Thanks Bernhard!

I will give these two approaches a try.

Pei

February 10, 2007, 15:50	Plot the whole cylinder from a wedge data	#1
hsieh Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 317 Rep Power: 18	Dear Paraview experts: I ran an axi-symmetric case (wedge). Is it possible to plot the whole cylinder from the wedge data? Thanks! Pei

February 12, 2007, 07:51	In principle yes, but it's not	#2
gschaider Assistant Moderator Bernhard Gschaider Join Date: Mar 2009 Posts: 4,225 Rep Power: 51	In principle yes, but it's not that easy. It depends on what you want. - One possibility is to use clever combinations of the Transform and the Group Filter - The other possibility is the RotationalExtrusion-Filter (but this one works only on "line-like" objects (for instance an iso-surface on a plane) __________________ Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request

February 13, 2007, 10:30	Thanks Bernhard! I will giv	#3
hsieh Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 317 Rep Power: 18	Thanks Bernhard! I will give these two approaches a try. Pei

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[General] Extracting ParaView Data into Python Arrays	Jeffzda	ParaView	30	November 6, 2023 21:00
CFD by anderson, chp 10.... supersonic flow over flat plate	varunjain89	Main CFD Forum	18	May 11, 2018 07:31
[General] Line plot with cell data: PlotOverLine ?	francois	ParaView	1	January 3, 2015 20:06
[OpenFOAM] Overlay scatter plot of experimental data on 'plot over line' in ParaView	gcengineer	ParaView	4	August 6, 2013 19:35
Plot data for a fixed point	aut_iut	OpenFOAM	0	December 23, 2010 05:16