I'm stuck, tried different BC's at outlet but not getting the satisfactory results. -- CFD Online Discussion Forums

February 25, 2020, 09:49	I'm stuck, tried different BC's at outlet but not getting the satisfactory results.	#1
mkjmalik Member Muhammad Kashif Jawad Join Date: Oct 2019 Location: Pakistan Posts: 48 Rep Power: 5	Hi Foamers! I,m working on MS thesis, Geometry is like T-shape channel, with two inlets and one Outlet. Discharge from inletMain= 0.0425m^3/s Discharge from inletBranch= 0.1275 m^3/s combined Discharge= 0.17m^3/s Tail velocity is 0.628m/s Tail Depth is 0.296m at inlets i just know discharges and at outlet i know everything. i'm stuck since one and half month doing simulation, but not getting the results at tail. "the velocity and depth" Any suggestions plz, what BC's should i use? I would be happy to provide any information besides i posted below here are my files https://nustedupk0-my.sharepoint.com/:f:/g/nust_edu_pk/EnreMW8eiohFpCTWQD9Q--IB0gSnRQNKrntQRmkKbvgrig?e=yD2ojy Last edited by mkjmalik; March 3, 2020 at 15:28. Reason: I dont want to share

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Issues on the simulation of high-speed compressible flow within turbomachinery	dowlee	OpenFOAM Running, Solving & CFD	11	August 6, 2021 06:40
Generating water waves - backflow at the outlet	Luke92	CFX	1	November 18, 2017 05:27
ATTENTION! Reliability problems in CFX 5.7	Joseph	CFX	14	April 20, 2010 15:45
Combining BCs: wall - outlet. Boundary layer disappears	MartinaF	OpenFOAM Running, Solving & CFD	1	July 20, 2009 18:14
Opening Vs outlet BCs and temporary wall issue	Sam	CFX	0	January 16, 2008 18:59

All times are GMT -4. The time now is 17:03.