|
[Sponsors] |
How to visualize the streaklines in paraview/paraFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 4, 2020, 02:32 |
How to visualize the streaklines in paraview/paraFoam
|
#1 |
Senior Member
chandra shekhar pant
Join Date: Oct 2010
Posts: 220
Rep Power: 16 |
Dear Foamers,
I have done a simulation in 3D and wanted to understand the flow over it using the streakline option, I am trying it since a long time but could not do that, could any one please help me with plotting the streakline in 3D simulations. Any comment or suggestion will be a great help. Thanks in advance. |
|
February 9, 2021, 23:53 |
|
#2 |
New Member
Mano
Join Date: May 2019
Posts: 9
Rep Power: 7 |
Dear Chandra Shekhar,
It's most likely that you have figured it out by now. In case you haven't, you can use the "Stream Tracer", found in the Common and Data Analysis Filters in Paraview. You can use a point source, or a line source, depending on what you want to do. Regards, Mano |
|
February 10, 2021, 01:08 |
|
#3 |
Senior Member
chandra shekhar pant
Join Date: Oct 2010
Posts: 220
Rep Power: 16 |
Hi Mano,
Thanks a lot for your help, but are the streaklines and "stream tracer" same? |
|
February 11, 2021, 00:26 |
|
#4 |
New Member
Mano
Join Date: May 2019
Posts: 9
Rep Power: 7 |
Theoretically, they are the same if your flow is steady But I do not know how to generate streaklines in Paraview. At least not yet! I hope someone comes up with a way soon.
Regards, Mano |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
cannot visualize wingtip vortecies, gets damped and streamlined | Erlendhj | STAR-CCM+ | 0 | April 24, 2017 03:28 |
[General] How do Streaklines Work? | dancfd | ParaView | 2 | April 8, 2016 16:07 |
Visualize the trapped particle coordinates at the wall | Saidul | ANSYS | 4 | December 3, 2014 18:02 |
How to visualize the components | raintung | FLUENT | 3 | May 20, 2003 09:47 |
Which quantity can be used to visualize vortex | Mike | Main CFD Forum | 7 | February 8, 2001 03:05 |