|
[Sponsors] |
April 18, 2023, 12:29 |
Issue with profiles in OpenFOAM
|
#1 |
New Member
William Peace
Join Date: Jan 2021
Location: United Kingdom
Posts: 8
Rep Power: 5 |
Hi all,
I have added profiles to the controlDict for capturing velocity and turbulent kinetic energy in my stirred tank system. There are 4 line profiles in total - 3 vertical and 1 horizontal with each capturing the data at a uniformly distributed 200 points along these lines. Upon examining the data, the files only seem to output 37 of these values. I am unsure as to what is going on? I have tried altering the number of points and it does not have any impact. There is no issue of HDD space as these files are fundamentally quite small (saving the output in .csv) format. I have attached my controlDict to this post. Any help would be greatly appreciated. William. |
|
Tags |
openfoam, postprocessing; openfoam; |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Getting Started with OpenFOAM | wyldckat | OpenFOAM | 25 | August 14, 2022 13:55 |
Floating issue when running openfoam through grasshopper | Mark JIN | OpenFOAM | 1 | May 24, 2017 21:04 |
CyclicAMI Issue In OpenFOAM 2.2.0 | prasant | OpenFOAM Running, Solving & CFD | 17 | March 16, 2013 02:00 |
Mesh export to OpenFOAM issue | sihaqqi | OpenFOAM Pre-Processing | 2 | March 2, 2013 22:14 |
Issue installation OpenFOAM - libopen-rte.so.0 | Voyage_gui | OpenFOAM | 1 | August 12, 2011 03:46 |