|
[Sponsors] |
Not able to obtain the derived pressure in case of fvOption |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 27, 2023, 11:51 |
Not able to obtain the derived pressure in case of fvOption
|
#1 |
New Member
SOURAV GANGULI
Join Date: Dec 2018
Posts: 11
Rep Power: 7 |
Hello everyone,
I am working on the flow through periodic channel where I have used cyclic boundary condition for inlet and outlet. I am using fvOption to impose meanVelocityForce as the source term. After reaching steady state when I trying to plot the mean pressure drop along the channel length I observed there is no mean pressure drop where I obtained fully developed velocity profile. I checked the script file of fvOption as found that pressure due to imposed source term is represented as derived pressure which I not able to obtain...so can anyone please help me to resolve the issue? Thanks and regards, Sourav |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
viscosity udf don't use correct temperature and strain rate | rezvani | Fluent UDF and Scheme Programming | 8 | May 27, 2021 05:40 |
Generate convective pressure fluctuation | Bananenflanke | CFX | 10 | May 12, 2021 18:33 |
Fail to converge when solving with a fabricated solution | zizhou | FLUENT | 0 | March 22, 2021 06:33 |
Getting divergence while increasing the back pressure at pressure outlet | greenfields15 | FLUENT | 0 | March 18, 2018 23:39 |
sonicFoam - pressure driven pipe: flow continuity violation and waveTransmissive BC | Endel | OpenFOAM Running, Solving & CFD | 3 | September 11, 2014 16:29 |