CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Post-Processing

It would be wonderful if a tool for FoamToTecplot is available

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 8, 2005, 03:41
Default Foam->Fluent->Tecplot doesn't
  #1
Member
 
Luckyluke
Join Date: Mar 2009
Posts: 51
Rep Power: 17
luckyluke is on a distinguished road
Foam->Fluent->Tecplot doesn't work well. Some solution field (e.g. gamma) will be lost along the conversion process.
luckyluke is offline   Reply With Quote

Old   April 8, 2005, 04:16
Default Hi, Luckyluke, We made a
  #2
cjwu
Guest
 
Posts: n/a
Hi, Luckyluke,

We made a very preliminary tool: foamToTecplot. You can download the file from

http://jslx.kmip.net/foamToTecplot-.tar.gz

and at your $HOME, use the following command to put it into the right place.

tar zxvf foamToTecplot-.tar.gz

then go to $HOME/OpenFOAM/OpenFOAM-1.1/applications/utilities/postProcessing/dataConversion /

wmake

That's all! After get into (your working dir.)/run/tutorials/icoFoam, you can use "foamToTecplot . cavity" to transform the data of the first example into tecplot format.

If you can improve it, please send me a copy.

Best,

Chui-Jie WU
  Reply With Quote

Old   April 8, 2005, 04:31
Default
  #3
cjwu
Guest
 
Posts: n/a

  Reply With Quote

Old   April 8, 2005, 04:36
Default Here is the tool. Chui-
  #4
cjwu
Guest
 
Posts: n/a
Here is the tool.



Chui-Jie WU
  Reply With Quote

Old   April 8, 2005, 04:41
Default Sorry! It is too big(203KB) to
  #5
cjwu
Guest
 
Posts: n/a
Sorry! It is too big(203KB) to upload here.
Please just click on the web address in my first message to download the file.

Chui-Jie WU
  Reply With Quote

Old   April 8, 2005, 04:56
Default It might be small enough if it
  #6
Senior Member
 
Join Date: Mar 2009
Posts: 854
Rep Power: 22
henry is on a distinguished road
It might be small enough if it is cleared-out of binary versions. Have you run wclean in the directory before packing? Do you have more than one binary version built in there? 32 and 64bit? Check the contents of the Make directory, you should only have files and options in there if everything is cleared-out well.
henry is offline   Reply With Quote

Old   April 8, 2005, 05:07
Default OK! Now it is small enough to
  #7
cjwu
Guest
 
Posts: n/a
OK! Now it is small enough to upload here.
After you download the file foamToTecplot-.tar.gz
go to your $HOME, use the following command to put it into the right place.

tar zxvf foamToTecplot-.tar.gz

then go to $HOME/OpenFOAM/OpenFOAM-1.1/applications/utilities/postProcessing/dataConversion/foamToTecplot/

and input:

wmake

I compiled it under RedHat Linux 9.

Best,

CJ
  Reply With Quote

Old   April 8, 2005, 09:20
Default Hi,CJ. Some errors come out al
  #8
Member
 
Luckyluke
Join Date: Mar 2009
Posts: 51
Rep Power: 17
luckyluke is on a distinguished road
Hi,CJ. Some errors come out along the 'wmake' cmd (OpenFOAM-1.0).
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Making dependency list for source file foamToTecplot.C
could not open file createTime.H for source file foamToTecplot.C

SOURCE_DIR=.
SOURCE=foamToTecplot.C ; g++ -m32 -Dlinux -DlinuxOpt -DscalarMachine -DoptSolvers -Wall -W -Wno-unused-parameter -O3 -ffast-math -DNoRepository -ftemplate-depth-30 -I/u1/yzheng9/OpenFOAM/OpenFOAM-1.0/src/OpenFOAM/lnInclude -IlnInclude -I. -DWM_PROJECT_VERSION='"'1.0'"' -I/u1/yzheng9/OpenFOAM/OpenFOAM-1.0/src/cfdTools/lnInclude -fPIC -pthread -c $SOURCE -o Make/linuxOpt/foamToTecplot.o
foamToTecplot.C:56:27: createTime.H: No such file or directory
In file included from foamToTecplot.C:57:
/u1/yzheng9/OpenFOAM/OpenFOAM-1.0/src/OpenFOAM/lnInclude/createMesh.H: In function `int main(int, char**)':
/u1/yzheng9/OpenFOAM/OpenFOAM-1.0/src/OpenFOAM/lnInclude/createMesh.H:2: error: `runTime' undeclared (first use this function)
/u1/yzheng9/OpenFOAM/OpenFOAM-1.0/src/OpenFOAM/lnInclude/createMesh.H:2: error: (Each undeclared identifier is reported only once for each function it appears in.)
make: *** [Make/linuxOpt/foamToTecplot.o] Error 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
luckyluke is offline   Reply With Quote

Old   April 9, 2005, 00:24
Default I compiled foamToTecplot under
  #9
cjwu
Guest
 
Posts: n/a
I compiled foamToTecplot under OpenFOAM1.1.
Did you input 'wmake' in the directory?

$HOME/OpenFOAM/OpenFOAM-1.1/applications/utilities/postProcessing/dataConversion /foamToTecplot/

CJ
  Reply With Quote

Old   April 18, 2005, 18:19
Default Hallo Chui-Jie. I don't have
  #10
New Member
 
Andriy Rybakov
Join Date: Mar 2009
Posts: 9
Rep Power: 17
rybakov is on a distinguished road
Hallo Chui-Jie.
I don't have problems with compiling. Then I try to translte result from Example icoFoam -> cavity.
In result file 2 last colomns seem like unnecessary.

Tecplot 10 can not read file. When I try to open file I recive message
Err: Err: Fe Cell 1 has bad index of 0.
Error occurred on line 621...
rybakov is offline   Reply With Quote

Old   April 18, 2005, 22:35
Default Hi, Dear Andrey, Thanks for
  #11
cjwu
Guest
 
Posts: n/a
Hi, Dear Andrey,

Thanks for your email! Since I do not have Tecplot 10.0, I only
did the test in Tecplot 9.0 and without any problem. Did you get
something like the enclosed file? Please try the enclosed file in Tecplot
10.0. I will try to get a Tecplot 10.0 and test in it.

0.5.dat.gz

What do you mean "In result file 2 last colomns seem like unnecessary."?

Best,

CJ
  Reply With Quote

Old   April 19, 2005, 08:45
Default Hi CJ, I understand my proble
  #12
New Member
 
Andriy Rybakov
Join Date: Mar 2009
Posts: 9
Rep Power: 17
rybakov is on a distinguished road
Hi CJ,
I understand my problem. I have started at first Ucomponents and then foamToTecplot. Therefore I recieved 3 additional columns. Wnen I delete files Ux, Uy, Uz, I have no problems with icoFoam -> cavity and converter.

But then I started to convert dieselFoam->aachenBomb
There is one small problem. At the beginning of the resulting file from foamToTecplot are only X, Y, Z, Vx, Vy, Vz, P wrote as header varialbles. When resulting directory has other variables (T, dQ, k, etc), it must be added by hands.
rybakov is offline   Reply With Quote

Old   April 19, 2005, 09:05
Default Right now in file writeTECfi
  #13
New Member
 
Andriy Rybakov
Join Date: Mar 2009
Posts: 9
Rep Power: 17
rybakov is on a distinguished road
Right now in file
writeTECfile.H
string <<'VARIABLES...
must be change for every special case and then compiled. I think it is not big problem
rybakov is offline   Reply With Quote

Old   April 27, 2005, 04:59
Default Hi, Chui-Jie WU, I tested you
  #14
New Member
 
Jongtae Kim
Join Date: Mar 2009
Location: Daejeon, Republic of Korea (South)
Posts: 8
Rep Power: 17
jkim is on a distinguished road
Hi, Chui-Jie WU,
I tested your foamToTec file converting program.
When I ploted the cavity mesh which is in the tut dir., I found mesh was kinked.
SO I read the source file writeTecfile.H, and found that vertex numbering is not correct.
OpenFoam's vertex numbering for the hex element can be directly used for the tecplot.
That is, vertex ordering of the shapeLabels is
0, 1, 2, 3, 4, 5, 6, 7 for hex
0, 1, 2, 2, 3, 4, 5, 6 for wedge
0, 1, 2, 2, 3, 4, 5, 5 for prism
0, 1, 2, 3, 4, 4, 4, 4 for pyramid
0, 1, 2, 2, 3, 3, 3, 3 for tet

Anyone, please check which vertex ordering is correct for tecplot plotting, and post the results
Thanks.
jkim is offline   Reply With Quote

Old   April 28, 2005, 12:19
Default Jontage, You're right. The
  #15
ali
Member
 
Ali Heidari
Join Date: Mar 2009
Location: Surrey, London, United Kingdom
Posts: 39
Rep Power: 17
ali is on a distinguished road
Jontage,

You're right. The shapeLabels should be changed as you mentioned. Actually, I only changed and tested the "hex" that is:

0, 1, 2, 3, 4, 5, 6, 7 for hex

and didn't change "wedge" or others. I guess for the other cases, you're right too.

PS: Don't you think this is the correct order for wedge?

0, 1, 2, 0, 3, 4, 5, 6 for wedge
ali is offline   Reply With Quote

Old   May 13, 2005, 13:53
Default Hallo, I changed the vertex
  #16
Senior Member
 
Markus Hartinger
Join Date: Mar 2009
Posts: 102
Rep Power: 17
hartinger is on a distinguished road
Hallo,

I changed the vertex ordering as proposed by Jongtae Kim and made the 'VARIABLES...' declaration in writeTECfile.H automatically. I tested it for my hex-mesh and the pitzDaily test-case and worked fine. The code is attached.
foamToTecplot.tar.gz

markus
hartinger is offline   Reply With Quote

Old   June 9, 2005, 01:00
Default Hi, Jongtae, Ali and Markus,
  #17
cjwu
Guest
 
Posts: n/a
Hi, Jongtae, Ali and Markus,

Thanks a lot for pointing out the error. I tested the code by Markus, and it works fine.

CJ
  Reply With Quote

Old   September 9, 2005, 15:43
Default I guess this "foamToTecplot" s
  #18
ali
Member
 
Ali Heidari
Join Date: Mar 2009
Location: Surrey, London, United Kingdom
Posts: 39
Rep Power: 17
ali is on a distinguished road
I guess this "foamToTecplot" still has some shortcomings. If you refine mesh at some cells using "refineMesh", "foamToTecplot" gives error. It doesn't convert to Tecoplot data, while for example, "foamToFieldview" easily converts it into Fieldview. Any ideas?

--> FOAM FATAL ERROR : Wrong number of vertices in cell
expected 4,5,6,7 or 8, found 0

Function: foamToTecplot
in file: writeTECfile.H at line: 96.

FOAM aborting

Aborted
ali is offline   Reply With Quote

Old   September 12, 2005, 05:38
Default My guess is that you have poly
  #19
Senior Member
 
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26
mattijs is on a distinguished road
My guess is that you have polyhedral cells. These cannot be handled by Tecplot so would need to be decomposed by the converter and this probably isn't being done.
mattijs is offline   Reply With Quote

Old   September 22, 2005, 10:57
Default Hi all, I've just dowload f
  #20
Senior Member
 
Francois Beaubert
Join Date: Mar 2009
Location: Lille, France
Posts: 147
Rep Power: 17
francois is on a distinguished road
Hi all,

I've just dowload foamToTecplot.tar.gz and try to build it in my ~/OpenFOAM/beaubert-1.2/applications/

I make a tar zxvf foamToTecplot.tar.gz and in the foamToTecplot directory I make a wmake but I got the following errors:

wmake
make: Nothing to be done for `allFiles'.
make: `Make/tru64GccOpt/dependencies' is up to date.

SOURCE_DIR=.
SOURCE=foamToTecplot.C ; g++ -DFOAM_EXCEPTION -Dtru64 -Dtru64GccOpt -DscalarMachine -DoptSolvers -Wall -O2 -fno-schedule-insns -DNoRepository -ftemplate-depth-30 -I/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/cfdTools/lnInclude -I/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude -IlnInclude -I. -fPIC -c $SOURCE -o Make/tru64GccOpt/foamToTecplot.o
foamToTecplot.C:30:19: error: fvCFD.H: No such file or directory
foamToTecplot.C:38: error: expected initializer before '<' token
foamToTecplot.C: In function 'int main(int, char**)':
foamToTecplot.C:42: error: 'argList' has not been declared
foamToTecplot.C:42: error: 'noParallel' was not declared in this scope
foamToTecplot.C:44: error: 'label' does not name a type
foamToTecplot.C:45: error: 'word' does not name a type
foamToTecplot.C:55: error: 'dynWordList' was not declared in this scope
foamToTecplot.C:55: error: expected `;' before 'headerNames'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/addConstantOption.H :1: error: 'argList' has not been declared
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/addConstantOption.H :1: error: 'validOptions' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/addConstantOption.H :2: error: 'argList' has not been declared
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/addTimeOption.H:1: error: 'argList' has not been declared
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/addLatestTimeOption .H:1: error: 'argList' has not been declared
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/setRootCase.H:1: error: 'argList' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/setRootCase.H:1: error: expected `;' before 'args'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/setRootCase.H:3: error: 'args' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/setRootCase.H:5: error: 'FatalError' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createTime.H:1: error: 'Info' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createTime.H:1: error: 'endl' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createTime.H:6: error: 'args' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createMesh.H:2: error: 'nl' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createMesh.H:4: error: 'fvMesh' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createMesh.H:4: error: expected `;' before 'mesh'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/createMesh.H:15: error: 'mesh' was not declared in this scope
foamToTecplot.C:63: error: 'pointMesh' was not declared in this scope
foamToTecplot.C:63: error: expected `;' before 'pMesh'
foamToTecplot.C:64: error: 'volPointInterpolation' was not declared in this scope
foamToTecplot.C:64: error: expected `;' before 'pInterp'
foamToTecplot.C:73: error: 'fileName' was not declared in this scope
foamToTecplot.C:73: error: expected `;' before 'dxDataPath'
foamToTecplot.C:74: error: 'dxDataPath' was not declared in this scope
foamToTecplot.C:74: error: 'mkDir' was not declared in this scope
foamToTecplot.C:76: error: expected `;' before 'dxDataFile'
foamToTecplot.C:77: error: 'OFstream' was not declared in this scope
foamToTecplot.C:77: error: expected `;' before 'timeOut'
foamToTecplot.C:80: error: 'label' was not declared in this scope
foamToTecplot.C:80: error: expected `;' before 'memberNumber'
foamToTecplot.C:83: error: 'instantList' was not declared in this scope
foamToTecplot.C:83: error: expected `;' before 'Times'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOptions.H: 1: error: expected `;' before 'startTime'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOptions.H: 2: error: expected `;' before 'endTime'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkConstantOption .H:3: error: 'startTime' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:3 : error: 'scalar' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:3 : error: expected `;' before 'time'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:6 : error: expected `;' before 'nearestDiff'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:8 : error: 'Times' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:1 2: error: expected `;' before 'diff'
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:1 3: error: 'diff' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:1 3: error: 'nearestDiff' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:2 0: error: 'startTime' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkTimeOption.H:2 1: error: 'endTime' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkLatestTimeOpti on.H:3: error: 'startTime' was not declared in this scope
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/OpenFOAM/lnInclude/checkLatestTimeOpti on.H:3: error: 'Times' was not declared in this scope
foamToTecplot.C:88: error: expected `;' before 'i'
foamToTecplot.C:88: error: name lookup of 'i' changed for new ISO 'for' scoping
foamToTecplot.C:67: error: using obsolete binding at 'i'
foamToTecplot.C:88: error: 'endTime' was not declared in this scope
foamToTecplot.C:91: error: 'startTime' was not declared in this scope
foamToTecplot.C:98: error: 'Times' was not declared in this scope
foamToTecplot.C:102: error: 'IOobjectList' was not declared in this scope
foamToTecplot.C:102: error: expected `;' before 'objects'
foamToTecplot.C:106: error: expected `;' before 'dxDataFile'
foamToTecplot.C:107: error: expected `;' before 'dataOut'
writeDXgrid.H:2: error: expected initializer before '&' token
writeDXgrid.H:4: error: 'points' was not declared in this scope
writeDXgrid.H:11: error: 'headerNames' was not declared in this scope
writeDXdata.H:3: error: 'SLList' was not declared in this scope
writeDXdata.H:3: error: 'word' was not declared in this scope
writeDXdata.H:3: error: 'validFields' was not declared in this scope
writeDXdata.H:5: error: expected `;' before 'i'
writeDXdata.H:5: error: 'nTypes' was not declared in this scope
writeDXdata.H:7: error: 'wordList' was not declared in this scope
writeDXdata.H:7: error: expected `;' before 'fieldNames'
writeDXdata.H:9: error: expected `;' before 'j'
writeDXdata.H:9: error: 'j' was not declared in this scope
writeDXdata.H:9: error: 'fieldNames' was not declared in this scope
writeDXdata.H:11: error: expected `;' before 'fieldName'
writeDXdata.H:13: error: 'IOobject' was not declared in this scope
writeDXdata.H:13: error: expected `;' before 'fieldObject'
writeDXdata.H:22: error: 'fieldObject' was not declared in this scope
writeDXdata.H:27: error: 'volScalarField' has not been declared
writeDXdata.H:27: error: 'typeName' was not declared in this scope
writeDXdata.H:30: error: 'fieldName' was not declared in this scope
writeDXdata.H:32: error: 'volScalarField' was not declared in this scope
writeDXdata.H:32: error: expected `;' before 'DXScalarField'
writeDXdata.H:34: error: 'pointScalarField' was not declared in this scope
writeDXdata.H:34: error: expected `;' before 'tmp'
writeDXdata.H:39: error: 'tmp' was not declared in this scope
writeDXdata.H:44: error: 'headerNames' was not declared in this scope
writeDXdata.H:49: error: 'volVectorField' has not been declared
writeDXdata.H:52: error: 'fieldName' was not declared in this scope
writeDXdata.H:54: error: 'volVectorField' was not declared in this scope
writeDXdata.H:54: error: expected `;' before 'DXVectorField'
writeDXdata.H:56: error: 'pointVectorField' was not declared in this scope
writeDXdata.H:56: error: expected `;' before 'tmp'
writeDXdata.H:61: error: 'tmp' was not declared in this scope
writeDXdata.H:68: error: 'headerNames' was not declared in this scope
writeDXseries.H:2: error: 'memberNumber' was not declared in this scope
writeDXseries.H:4: error: 'timeOut' was not declared in this scope
writeDXseries.H:9: error: 'timeOut' was not declared in this scope
writeDXseries.H:10: error: 'memberNumber' was not declared in this scope
writeTECfile.H:2: error: expected initializer before '&' token
writeTECfile.H:3: error: expected initializer before '&' token
writeTECfile.H:5: error: 'dataOut' was not declared in this scope
writeTECfile.H:9: error: 'headerNames' was not declared in this scope
writeTECfile.H:19: error: 'points' was not declared in this scope
writeTECfile.H:24: error: 'tab' was not declared in this scope
writeTECfile.H:29: error: 'cells' was not declared in this scope
writeTECfile.H:31: error: expected initializer before '&' token
writeTECfile.H:33: error: 'shapeLabels' was not declared in this scope
writeTECfile.H:37: error: 'tab' was not declared in this scope
writeTECfile.H:96: error: 'FatalError' was not declared in this scope
/data2/beaubert/usr/local/lib/gcc/alphaev7-dec-osf5.1b/4.0.1/include/stdlib.h:22 8: error: too many arguments to function 'void abort()'
writeTECfile.H:99: error: at this point in file
foamToTecplot.C:114: error: 'headerNames' was not declared in this scope
make: *** [Make/tru64GccOpt/foamToTecplot.o] Error 1



A find ~/OpenFOAM/OpenFOAM-1.2 -name fvCFD.H give me :

/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/cfdTools/general/lnInclude/fvCFD.H
/data2/beaubert/OpenFOAM/OpenFOAM-1.2/src/cfdTools/general/include/fvCFD.H

What's wrong with my configuration ?
francois is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem manipulating Data in Tecplot after foamToTecplot Conversion titio OpenFOAM Post-Processing 2 June 10, 2010 05:23
CFD science or tool? Mateusz Main CFD Forum 10 November 25, 2008 00:16
[mesh manipulation] ScalePoints tool cedric_duprat OpenFOAM Meshing & Mesh Conversion 6 September 19, 2008 04:15
Gridgeneration Tool AndyR Main CFD Forum 2 May 23, 2008 09:49
PDF repaire tool? John Main CFD Forum 0 February 23, 2008 08:32


All times are GMT -4. The time now is 10:21.