|
[Sponsors] |
parabolic velocity: simple way to implement this bondary condition? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 10, 2014, 14:08 |
parabolic velocity: simple way to implement this bondary condition?
|
#1 |
Member
Tommy Sp
Join Date: Jan 2014
Posts: 51
Rep Power: 12 |
hello
I am newbie in openfoam I saw some posts on the subject, at first I was scared. Could someone show me how to implement the parabolic velocity profile to the input of my tube (2D)? What do I do? Thanks for attention and sorry for posting this topic again. If I can implement, I will make a pdf manual for beginners to share here. Thank you for your attention. I use OpenFOAM 2.3.0 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do I prescribe Average Velocity /Total Inlet Flow for a simple channel problem? | skuznet | OpenFOAM Pre-Processing | 4 | February 16, 2022 09:44 |
Problem with assigned inlet velocity profile as a boundary condition | Ozgur_ | FLUENT | 5 | August 25, 2015 04:58 |
Condition of Air velocity in Open Channel simulation | wes1204 | OpenFOAM Running, Solving & CFD | 0 | May 9, 2014 05:08 |
implement tangential boundary condition in simple | jhuang | Main CFD Forum | 4 | July 10, 2006 04:01 |
what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 05:13 |