|
[Sponsors] |
Open multiple stl files via snappyHexMesh utility |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 16, 2014, 03:08 |
Open multiple stl files via snappyHexMesh utility
|
#1 |
Member
Bineet Mehra
Join Date: Aug 2013
Posts: 61
Rep Power: 12 |
Is it possible to import two different stl files in snappyHexMeshDict and mesh them. I want to mesh a cylinder and an airfoil. The aim is to use AMI between these two mesh interfaces and make the airfoil move.
Please let me know any other way also. |
|
July 16, 2014, 03:17 |
|
#2 |
Member
Bineet Mehra
Join Date: Aug 2013
Posts: 61
Rep Power: 12 |
i have stl file with both of the geometries included. Will it be possible for me to use snappyHexMesh to mesh them such that cylinder remains fixed while the airfoil moves. I guess it won't because the two geometries are the part of same stl.. Please correct me
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to set periodic boundary conditions | Ganesh | FLUENT | 15 | November 18, 2020 06:09 |
Trouble compiling utilities using source-built OpenFOAM | Artur | OpenFOAM Programming & Development | 14 | October 29, 2013 10:59 |
How to generate STL files for idealized geometries? | werder85 | Main CFD Forum | 0 | November 1, 2012 12:47 |
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry | villier | OpenFOAM Meshing & Mesh Conversion | 17 | June 15, 2010 19:51 |
Problems in compiling paraview in Suse 10.3 platform | chiven | OpenFOAM Installation | 3 | December 1, 2009 07:21 |