CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

laminar flow in one zone and kEpsilon model in the other zone.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 28, 2016, 08:55
Default laminar flow in one zone and kEpsilon model in the other zone.
  #1
New Member
 
lahcen
Join Date: Nov 2016
Posts: 5
Rep Power: 9
super1 is on a distinguished road
Dear Foamers,


How can I make turbulence model which be capable to distinct between lam-
inar and turbulent zones. In other way, how can i set laminar flow in one zone and kEpsilon model in the other zone.

Thank you for your help
super1 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
use laminar and kEpsilon model in one case openfoam super1 OpenFOAM Programming & Development 0 December 28, 2016 08:52
[Commercial meshers] TGridFluent mesh with internal by prism layer and internal face for diagnostic sponiar OpenFOAM Meshing & Mesh Conversion 2 March 30, 2009 16:02


All times are GMT -4. The time now is 14:34.