|
[Sponsors] |
Converting a boundary field to internal field/face in a hybrid mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 20, 2020, 18:33 |
Converting a boundary field to internal field/face in a hybrid mesh
|
#1 |
Member
Stanley John
Join Date: Sep 2018
Posts: 79
Rep Power: 7 |
Hi,
I made an hybrid mesh using ICEM-CFD and the interface between the structured and unstructured mesh shows up as an boundary field, while it should be an internal face. Does anyone know how to make it an internal face by toposet or boundary conditions? The boundary field looks like this: PHP Code:
|
|
August 20, 2020, 19:38 |
|
#2 |
Member
Stanley John
Join Date: Sep 2018
Posts: 79
Rep Power: 7 |
This problem was solved by setting the boundary field INT_FACES as an interior face in ICEMCFD
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
Table bounds warnings at: END OF TIME STEP | CFXer | CFX | 4 | July 16, 2020 23:44 |
UDF for Automatic Solution Initialization for previous case data file | gartz89 | Fluent UDF and Scheme Programming | 6 | March 30, 2020 07:38 |
Question about adaptive timestepping | Guille1811 | CFX | 25 | November 12, 2017 17:38 |
Centrifugal fan-reverse flow in outlet lesds to a mass in flow field | xiexing | CFX | 3 | March 29, 2017 10:00 |