Open foam Tutorial - Incompressible Fluid Dynamics

GokturkBurhan · January 3, 2024, 13:38

Hi everyone, this is my first thread.

I want to do thrust analyze for uav propeller with openfoam but I dont know openfoam very well. For this analyze, I need to work on compressible fluid. I didn't found compressible tutorial case in files. But we have incompressible tutorial. Can I change it and how can I do this. Or can I found similar files on web ?

İf this topic was discussed in forum, I m sorry in advance.

dlahaye · January 5, 2024, 02:17

Please look for the compressible flow tutorials in the OpenFoam tutorials. Depending on the distribution and set-up that you are using the following commands

Code:

tut
cd compressible

take you there straight away.

Alternatively, you browse e.g. https://github.com/OpenFOAM/OpenFOAM...ster/tutorials

Please give it a look and post question here.

January 3, 2024, 13:38	Open foam Tutorial - Incompressible Fluid Dynamics	#1
GokturkBurhan New Member Burhan Göktürk Join Date: Dec 2023 Posts: 2 Rep Power: 0	Hi everyone, this is my first thread. I want to do thrust analyze for uav propeller with openfoam but I dont know openfoam very well. For this analyze, I need to work on compressible fluid. I didn't found compressible tutorial case in files. But we have incompressible tutorial. Can I change it and how can I do this. Or can I found similar files on web ? İf this topic was discussed in forum, I m sorry in advance.

January 5, 2024, 02:17		#2
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 723 Blog Entries: 1 Rep Power: 17	Please look for the compressible flow tutorials in the OpenFoam tutorials. Depending on the distribution and set-up that you are using the following commands Code: tut cd compressible take you there straight away. Alternatively, you browse e.g. https://github.com/OpenFOAM/OpenFOAM...ster/tutorials Please give it a look and post question here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using PengRobinsonGas EoS with sprayFoam	Jabo	OpenFOAM Running, Solving & CFD	35	April 29, 2022 15:35
polynomial BC	srv537	OpenFOAM Pre-Processing	4	December 3, 2016 09:07
simpleFoam parallel	AndrewMortimer	OpenFOAM Running, Solving & CFD	12	August 7, 2015 18:45
OpenFOAM without MPI	kokizzu	OpenFOAM Installation	4	May 26, 2014 09:17
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 09:56