|
[Sponsors] |
March 25, 2021, 01:50 |
Thermal Analysis - Problem
|
#1 |
New Member
Prabhu
Join Date: Feb 2021
Posts: 6
Rep Power: 5 |
Hi,
I have a problem in solving Thermal related one. Problem Description: 1. Room 1m*1m*1m 2. Outside of the room temperature is 20C 3. Heat Source is placed in the centre of the room its q=100W/m2 4. Inlet velocity is 1m/s2 & T=15C 5. Outlet Atmospheric Temperature Output : Temperature @ one side is 117C Hand Calculation : We got 50C. The value between analysis and hand calculation is too high. How to find out where we did wrong. I sent you the file template which I used for this study. (If we change which value of the input means the temperature will vary) Temperature, Velocity, Pressure and Heat Source is fixed. What other factor is influencing the temperature values. How to attain the hand calculated temperature values. Thank you in Advance, Prabhu M. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FSI Transient Thermal Analysis | Abduri | CFX | 1 | January 1, 2017 22:54 |
[ANSYS Meshing] Meshing problem for transient analysis | arun1994 | ANSYS Meshing & Geometry | 0 | July 5, 2016 10:37 |
Thermal phase change set up problem | Danial Q | Main CFD Forum | 1 | July 10, 2014 14:41 |
Problem with HGEN load on transient thermal analysis | juhaniit | ANSYS | 0 | May 7, 2014 19:29 |
analysis the photovoltaic thermal collector (PV/T) by Ansys and Radiation modle | ali.alshamani | FLUENT | 0 | March 16, 2014 00:40 |