|
[Sponsors] |
Heat flux boundary condition with interCondensatingEvaporatingFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 3, 2021, 01:46 |
Heat flux boundary condition with interCondensatingEvaporatingFoam
|
#1 |
Member
L S
Join Date: Apr 2016
Posts: 63
Rep Power: 10 |
Dear all,
I have seen numerous tutorials on solving boiling problems with interCondensatingEvaporatingFoam, interThermalPhaseChangeFoam, phaseChangeHeatFoam which are based on Scharge and Lee model. All these tutorials are having "Constant wall temperature" boundary condition. We know, "Constant wall heat flux" is more practical way to implement heat condition. But, it is tricky, hence, most of developers of these codes have avoided implementing heat flux condition. Though, I have tried to provide "Heat flux" boundary condition with the help of temperature gradient (using swak4Foam), which is giving me reasonable result but with error ranging from 20-50%. TemperatureGradient = q/Keff, where q = heat flux and Keff = kL*alpha+kV*(1-alpha) Do, you know any more realistic way to apply the "Heat flux" boundary condition? |
|
Tags |
boiling, heat flux, intercondensatingevapor, openfoam, phase change |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
CFD analaysis of Pelton turbine | amodpanthee | CFX | 31 | April 19, 2018 19:02 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 09:44 |
Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 05:39 |
Enforce bounds error with heat loss boundary condition at solid walls | Chander | CFX | 2 | May 1, 2012 21:11 |