|
[Sponsors] |
December 20, 2010, 11:09 |
Volume Scheme: upwind and linearUpwind
|
#1 |
New Member
Renata
Join Date: Dec 2010
Location: Denmark
Posts: 3
Rep Power: 15 |
Hi all,
I would like to know what is the difference between 'upwind' and 'linearUpwind' in the OpenFoam finite volume scheme. Thank you, |
|
December 20, 2010, 15:58 |
|
#2 |
Senior Member
Travis Carrigan
Join Date: Jul 2010
Location: Arlington, TX
Posts: 161
Rep Power: 15 |
Upwind is your standard 1st order upwind scheme.
linearUpwind is a 2nd order scheme, essentially a Taylor series expansion about the cell center requiring gradient information (hence, the 2nd order accuracy). |
|
June 26, 2021, 23:05 |
|
#3 |
Senior Member
Herpes Free Engineer
Join Date: Sep 2019
Location: The Home Under The Ground with the Lost Boys
Posts: 932
Rep Power: 12 |
A contribution after 11 years:
J. Guerrero's Finite Volume Method: A Crash introduction's 14th and 15th slides give a succinct explanation for the upwind and linearUpwind schemes.
__________________
The OpenFOAM community is the biggest contributor to OpenFOAM: User guide/Wiki-1/Wiki-2/Code guide/Code Wiki/Journal Nilsson/Guerrero/Holzinger/Holzmann/Nagy/Santos/Nozaki/Jasak/Primer Governance Bugs/Features: OpenFOAM (ESI-OpenCFD-Trademark) Bugs/Features: FOAM-Extend (Wikki-FSB) Bugs: OpenFOAM.org How to create a MWE New: Forkable OpenFOAM mirror |
|
June 26, 2021, 23:32 |
|
#4 |
Senior Member
Herpes Free Engineer
Join Date: Sep 2019
Location: The Home Under The Ground with the Lost Boys
Posts: 932
Rep Power: 12 |
at least 10 characters.
__________________
The OpenFOAM community is the biggest contributor to OpenFOAM: User guide/Wiki-1/Wiki-2/Code guide/Code Wiki/Journal Nilsson/Guerrero/Holzinger/Holzmann/Nagy/Santos/Nozaki/Jasak/Primer Governance Bugs/Features: OpenFOAM (ESI-OpenCFD-Trademark) Bugs/Features: FOAM-Extend (Wikki-FSB) Bugs: OpenFOAM.org How to create a MWE New: Forkable OpenFOAM mirror |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem in fvschemes divSchemes cannot use Gauss linearUpwind | nico765 | OpenFOAM Bugs | 30 | August 9, 2018 07:39 |
solution diverges when linear upwind interpolation scheme is used | subash | OpenFOAM | 0 | May 29, 2010 01:23 |
first order gradient scheme ?? | kdarc | OpenFOAM | 3 | May 26, 2010 12:08 |
Discretization settings Foam vs. Fluent | wuppdupp | OpenFOAM Pre-Processing | 6 | July 25, 2009 02:35 |
Unknown Discretization scheme | dinonettis | OpenFOAM Running, Solving & CFD | 3 | March 16, 2008 08:52 |