|
[Sponsors] |
Varying Temperature Gradients in each node for Boundary Condition |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 7, 2015, 15:36 |
Varying Temperature Gradients in each node for Boundary Condition
|
#1 |
New Member
Join Date: Mar 2015
Posts: 1
Rep Power: 0 |
Hi all,
I want to apply a non-uniform gradient boundary condition for each node, and this gradient distribution cannot be defined as a simple function. Can you help me to do that? Thanks a lot |
|
March 8, 2015, 08:45 |
|
#2 |
Senior Member
Alex
Join Date: Oct 2013
Posts: 337
Rep Power: 21 |
Hi,
Maybe what you need is funkySetFields or funkySetBoundaryFields utilies. Check them out! Otherwise you could check also groovyBC, a good way to create your own custom BC's without programming! Regards, Alex
__________________
Web site where I present my Master's Thesis: foamingtime.wordpress.com The case I talk about in this site was solved with chtMultiRegionSimpleFoam solver and involves radiation. Some basic tutorials are also resolved step by step in the web. If you are interested in these matters, you are invited to come in! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unrealistic Temperature Gradients | skapetan | Siemens | 2 | December 16, 2014 07:46 |
Temperature condition inside an entire region | Twinsen_cfd | STAR-CCM+ | 2 | November 20, 2014 03:36 |
To change temperature in mass flow inlet boundary condition per iteration | ajinkya201991 | FLUENT | 1 | July 11, 2014 11:29 |
Time varying ambient temperature as B.C in OpenFoam | Kumudu | Main CFD Forum | 0 | October 24, 2013 14:08 |
boundary condition for temperature | ane | Main CFD Forum | 0 | March 24, 2008 04:27 |