CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

Changing Polynomial Properties of species from 8 to 16 coefficients

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 9, 2013, 12:25
Default Changing Polynomial Properties of species from 8 to 16 coefficients
  #1
New Member
 
Join Date: Jul 2013
Posts: 14
Rep Power: 13
Kenna is on a distinguished road
P { margin-bottom: 0.21cm; } I have a case in which I need the implement thermophysical properties for a wide temperature range of fluids from 300 K to 30000 K. I got the data but have trouble to let OpenFoam use them.

My first choice for this problem would be copying the existing library about polynomial functions for the thermophysicalProperties-File and make out of 8 coefficients 16. I made a custom solver already which is directed to the copied libary and the solver works with it.

I changed in the make/options file this:
Code:
EXE_INC = \
    -I$(WM_PROJECT_DIR)/src/thermophysicalModels/basic/lnInclude \
by this
Code:
EXE_INC = \
    -I$(WM_PROJECT_USER_DIR)/src/thermophysicalModels/basic/lnInclude \
Is it enough to change in all relevant files the 8 to a 16? Relevant files might be for example:

thermophysicalModels/specie/include/thermoPhysicsTyes.H //i.e icoPolynomial<specie, 16>,

For icoPolynomial:
src/thermophysicalModels/specie/equationOfState/icoPolynomial/icoPolynomial.C
src/thermophysicalModels/specie/equationOfState/icoPolynomial/icoPolynomial.H //i.e. PolySize=16
src/thermophysicalModels/specie/equationOfState/icoPolynomial/icoPolynomialI.H

And the same files for:
thermo/hPolynomial
transport/polynomial


I tried to change only the icoPolynomial part. Used ./Allwmake on /src/thermophysicalModels
and a got a Error message from the terminal.


Code:
 kennametal@kennametal-Precision-WorkStation-T3500:~/OpenFOAM/kennametal-2.2.0/src/thermophysicalModels$ ./Allwmake 
 + wmake libso specie 
 Making dependency list for source file reaction/reactions/makeLangmuirHinshelwoodReactions.C 
 Making dependency list for source file reaction/reactions/makeReactions.C 
 SOURCE=reaction/reactions/makeReactions.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-100  -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/makeReactions.o 
 SOURCE=reaction/reactions/makeLangmuirHinshelwoodReactions.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-100  -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/makeLangmuirHinshelwoodReactions.o 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libspecie.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libspecie.so] Fehler 1 
 + wmake libso solidSpecie 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidSpecie.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidSpecie.so] Fehler 1 
 + wmake libso thermophysicalFunctions 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libthermophysicalFunctions.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libthermophysicalFunctions.so] Fehler 1 
 + ./properties/Allwmake 
 + wmake libso liquidProperties 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libliquidProperties.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libliquidProperties.so] Fehler 1 
 + wmake libso liquidMixtureProperties 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libliquidMixtureProperties.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libliquidMixtureProperties.so] Fehler 1 
 + wmake libso solidProperties 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidProperties.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidProperties.so] Fehler 1 
 + wmake libso solidMixtureProperties 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidMixtureProperties.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidMixtureProperties.so] Fehler 1 
 + wmake libso basic 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so] Fehler 1 
 + wmake libso reactionThermo 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libreactionThermophysicalModels.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libreactionThermophysicalModels.so] Fehler 1 
 + wmake libso laminarFlameSpeed 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/liblaminarFlameSpeedModels.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/liblaminarFlameSpeedModels.so] Fehler 1 
 + wmake libso chemistryModel 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libchemistryModel.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libchemistryModel.so] Fehler 1 
 + wmake libso barotropicCompressibilityModel 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libbarotropicCompressibilityModel.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libbarotropicCompressibilityModel.so] Fehler 1 
 + wmake libso SLGThermo 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libSLGThermo.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libSLGThermo.so] Fehler 1 
 + wmake libso solidThermo 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidThermo.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidThermo.so] Fehler 1 
 + wmake libso solidChemistryModel 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidChemistryModel.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libsolidChemistryModel.so] Fehler 1 
 + wmake libso radiationModels 
 /usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libradiationModels.so: Permission denied 
 collect2: ld gab 1 als Ende-Status zurück 
 make: *** [/opt/openfoam220/platforms/linuxGccDPOpt/lib/libradiationModels.so] Fehler 1 
 kennametal@kennametal-Precision-WorkStation-T3500:~/OpenFOAM/kennametal-2.2.0/src/thermophysicalModels$
In short I think the first problem starts here
/usr/bin/ld: cannot open output file /opt/openfoam220/platforms/linuxGccDPOpt/lib/libspecie.so: Permission denied
I guess I need to adjust somewhere an other option file or an #include command.

I don't know any further. I would appreciate your help.

Thanks
Kenna







Also this post was helpful to me so far:
http://www.cfd-online.com/Forums/ope...olynomial.html

I am using OpenFOAM 2.2.0
and especially the solver compressibleTwoPhasesEulerFoam

Last edited by Kenna; October 9, 2013 at 12:27. Reason: Thanks Kenna
Kenna is offline   Reply With Quote

Old   November 20, 2013, 04:44
Default
  #2
New Member
 
Join Date: Jul 2013
Posts: 14
Rep Power: 13
Kenna is on a distinguished road
So, after some time I tried it again and it works. Maybe the problem was something else in OpenFOAM.

I tested it with the PolynomialTransport.H
I changed the PolySize=8 to PolySize=16

In the thermoPhysicsTypes.H

I changed in the one specific thermoType description with a polynomial Transport the last 8 to a 16.

I tested a case with compressibleTwoPhaseEulerFoam. The Error Messages demandes 16 coefficients. I put zeros at the mueCoeffs till there were 16 numbers. And it calculated.

I also guess it calculates correct. But I didn't check this with other Cases jet.
Kenna is offline   Reply With Quote

Reply

Tags
polynomial, thermo library, thermo type, thermophysical model, wmake error

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Natural convection- properties calculation by polynomial eqn ajayiitkgp FLUENT 1 June 3, 2014 18:45
Ethanol Gas Polynomial Coefficients Trustydelux Siemens 0 March 8, 2012 09:54
Polynomial thermophysical properties and laminar porous Zone vemps OpenFOAM 0 June 30, 2011 11:13
species properties of coalchemistryfoam yingkun OpenFOAM Running, Solving & CFD 0 May 14, 2011 10:31
polynomial thermophysical properties jason.ryon OpenFOAM 2 May 11, 2011 07:16


All times are GMT -4. The time now is 00:52.