|
[Sponsors] |
Read real thermophysical properties from CoolProp library |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 18, 2023, 09:49 |
Read real thermophysical properties from CoolProp library
|
#1 |
New Member
Join Date: Jun 2023
Posts: 1
Rep Power: 0 |
Hello,
I am currently trying to implement real thermodynamic fluid properties (rho, Hs, Cp, Cv, Mu and kappa), and I would like to read these properties directly from a validated library, such as in CoolProp library /REFPROP. However, I don't know how to do it, and I need your help/advices with that. I tried at first to read all these properties in self-made tables, (using tabulated, htabulated and rhoTabulated in my thermoType), but they are not enough accurate, this is why I would like to read them from available datasets. Recently, I installed the CoolProp wrapper for Linux environnement, but I don't know how to make my openFoam code to read its data. I was at first inspired by this article CoolFOAM: The CoolProp wrapper for OpenFOAM, but it is not explicit about how they manage to do it (or I don't understand it). There is also this tool (https://github.com/cbunge/coolPropTa...or/tree/master), but it is only available for openFoam 5.x, and I am working with openFoam 9. If you might help me with this problem, Thank you in advance. PS: I am new to openFoam and this forum, so don't hesitate to indicate me any issues with my post so that I can correct them |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Setting the height of the stream in the free channel | kevinmccartin | CFX | 12 | October 13, 2022 21:43 |
UDF velocity profile | willroca | Fluent UDF and Scheme Programming | 2 | January 10, 2016 03:13 |
Non-linear equation system (DEFINE_source) | Laexzzz | Fluent UDF and Scheme Programming | 4 | February 11, 2015 16:11 |
Problems in air flow udf - divergence | PJT | Fluent UDF and Scheme Programming | 0 | May 28, 2013 10:01 |
view factor | yoollooz | Fluent UDF and Scheme Programming | 0 | March 1, 2013 00:44 |