CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

OpenFOAM profiling on Intel Xeon and Xeon Phi processors

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By pbachant

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 3, 2017, 03:22
Post OpenFOAM profiling on Intel Xeon and Xeon Phi processors
  #1
New Member
 
Sumeet Patil
Join Date: Oct 2016
Location: Pune
Posts: 9
Rep Power: 10
Sumeet Patil is on a distinguished road
Hello friends,
I have installed OpenFOAM on Intel platform using Intel compiler (ICC,ICPC), Intel MPI.
I want to profile the simpleFoam solver execution on Intel Xeon and Xeon Phi processors.
I have tried profiling with VTune software as well as HPC Toolkit.

HPC Toolkit doesnt show the profiling result as accurate as expected, because the execution time took 830 sec but the profiling result showed 5500 sec ?

Can anyone help me out with profiling on XEON and XEON PHI platform for OpenFOAM solvers ?
Sumeet Patil is offline   Reply With Quote

Old   April 4, 2017, 03:05
Default
  #2
New Member
 
Sumeet Patil
Join Date: Oct 2016
Location: Pune
Posts: 9
Rep Power: 10
Sumeet Patil is on a distinguished road
Hi,

The profiling with HPC toolkit works fine when profiling on single node, but when I go for multi node it gives error as "APPLICATION TERMINATED WITH THE EXIT STRING: Segmentation fault (signal 11)"
Sumeet Patil is offline   Reply With Quote

Old   April 28, 2017, 11:33
Default
  #3
Senior Member
 
Pete Bachant
Join Date: Jun 2012
Location: Boston, MA
Posts: 173
Rep Power: 14
pbachant is on a distinguished road
I have done a little profiling with valgrind and it seems to work well. See https://github.com/turbinesFoam/turb...wiki/Profiling for my notes and a link to the original tutorial.
Tobi likes this.
__________________
Home | Twitter | GitHub
pbachant is offline   Reply With Quote

Old   April 28, 2017, 14:19
Default
  #4
New Member
 
Sumeet Patil
Join Date: Oct 2016
Location: Pune
Posts: 9
Rep Power: 10
Sumeet Patil is on a distinguished road
Hello pbachant,

Thanks for help, the link was well informative.

Does it work on Intel Xeon Phi (MIC coprocessor) ?
I had tried it but it failed on MIC, if you are sure about this I will give it one more try.
Sumeet Patil is offline   Reply With Quote

Reply

Tags
openfoam, profiling

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Comparison of OpenFOAM on i7, Xeon@32 cores, Xeon Phi Knights Landing, Tesla K20m ma-tri-x OpenFOAM Installation 6 March 10, 2018 09:00
[OpenFOAM.org] OpenFOAM build on Intel Xeon Phi asaijo OpenFOAM Installation 31 July 26, 2017 10:35
[OpenFOAM.org] Trouble Compiling OpenFOAM-dev using Intel Compiler 15 for use on Xeon Phi foamer123 OpenFOAM Installation 9 August 20, 2015 14:03
Running OpenFoam in parallel on xeon phi bala_gk1988 OpenFOAM Running, Solving & CFD 1 July 28, 2015 16:16
OpenFOAM2.3.0 on Intel Xeon Phi with OpenMPI-1.6.5 manredd OpenFOAM Installation 1 June 6, 2014 15:41


All times are GMT -4. The time now is 00:51.