|
[Sponsors] |
Combination of the conjugate heat transfer and phase change model |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 15, 2020, 00:14 |
Combination of the conjugate heat transfer and phase change model
|
#1 |
New Member
Ilhwan Yeo
Join Date: Jan 2020
Posts: 18
Rep Power: 6 |
Good afternoon.
I am a fairly newbie. I have a some question about adding solid region in other solver. I made the case file but failed because of the following error --> FOAM FATAL IO ERROR Cannot find patchField entry for walls file: /home/2phase/OpenFOAM/2phase-2.2.0/applications/solvers/valdiation/0/wall/p.boundaryField from line 26 to line 40. From function GeometricField<Type, PatchField, GeoMesh>::GeometricBoundaryField::readField(const DimensionedField<Type, GeoMesh>&, const dictionary&) in file /home/2phase/OpenFOAM/OpenFOAM-2.2.0/src/OpenFOAM/lnInclude/GeometricBoundaryField.C at line 154. FOAM exiting. Last edited by jayson; July 15, 2020 at 01:37. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Conjugate heat transfer with phase change produced wrong temperature | qtruong | OpenFOAM Programming & Development | 0 | July 10, 2018 14:16 |
Conjugate Heat transfer with phase change | cfdsolve | FLUENT | 0 | August 4, 2016 08:02 |
Conjugate heat transfer + phase change | JohnJohn8 | Main CFD Forum | 0 | July 29, 2016 07:20 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
conjugate heat transfer with phase change | mogoko | CFX | 2 | March 23, 2011 11:25 |