|
[Sponsors] |
September 25, 2015, 00:31 |
Dynamic mesh motion trouble
|
#1 |
New Member
Join Date: Apr 2015
Posts: 14
Rep Power: 11 |
I'm running this wave flume case on OpenFoam 2.2.2
https://www.dropbox.com/s/jzjtxrosmc...yM.tar.gz?dl=0 I'm using wavesDyMFoam to solve the case. If I'm considering a floating object of 0.25*0.25 m2, the simulation ends correctly without any issue. Unfortunately I have to simulate a floating object with the following dimensions: 1x0.01 m2 (a thin panel floating in the water), and if I try to modify the size of the floating object in my case the computation ends up far before 1 second. I've tried to extend only the length, or to shrink only the thickness, but I'm always facing enormous struggling. What am I missing? Why if the object is squared the simulation proceed correctly but when it's rectangular it doesn't? Thanks for any suggestion Cheers |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dynamic mesh, time related and sine motion | burt | OpenFOAM | 2 | June 14, 2013 11:47 |
Dynamic Mesh moving interface help | akash.iitb | FLUENT | 0 | August 23, 2010 23:53 |
Turbulent problems during Dynamic Mesh Motion | arturojortega | FLUENT | 2 | June 2, 2009 10:33 |
Polynomial Dynamic Mesh Motion | AVK | Fluent UDF and Scheme Programming | 1 | March 27, 2009 09:51 |
Automatic Mesh Motion solver | michele | OpenFOAM Running, Solving & CFD | 10 | September 26, 2005 08:21 |