[dappe]

Hello everybody,
I'm working on an axysymmetric impinging jet and I want to compare the results found with Fluent. I already have the mesh, a 1 degree wedge of the jet and all the boundary conditions. I'm using OpenFoam 2.4 in openSUSE 13.2. The turbulence model is kOmegaSST and the solver is rhoSimpleFoam.
The simulation crashes at the 2nd iteration with this error message:

#0 Foam::error:rintStack(Foam::Ostream&) at ??:?
#1 Foam::sigFpe::sigHandler(int) at ??:?
#2 ? in "/lib64/libc.so.6"
#3 Foam::hePsiThermo<Foam:siThermo, Foam:ureMixture<Foam::sutherlandTransport<Foam:: species::thermo<Foam::hConstThermo<Foam:erfectGa s<Foam::specie> >, Foam::sensibleInternalEnergy> > > >::calculate() at ??:?
#4 Foam::hePsiThermo<Foam:siThermo, Foam:ureMixture<Foam::sutherlandTransport<Foam:: species::thermo<Foam::hConstThermo<Foam:erfectGa s<Foam::specie> >, Foam::sensibleInternalEnergy> > > >::correct() at ??:?
#5 ? at ??:?
#6 __libc_start_main in "/lib64/libc.so.6"
#7 ? at /home/abuild/rpmbuild/BUILD/glibc-2.19/csu/../sysdeps/x86_64/start.S:125
Floating point exception


I had one similar error in a previous simulation and I managed to fix it changing my bc (one field was 0 and that is why I have had a Floating exception error), but now the bcs should be right.
My OpenFOAM' knowledge is very limited; however, I tried to fix this problem in several ways suggested in other threads but I haven't found a solution. I ve also switched off the turbulence model just to see if the problem was there but it didnt work.
In the attachment you can find my case without the mesh (otherwise the file would have been too much big for the uploading). I have also added a screen of my domain so you can better understand the case.
May you help me with this error please?
Thank you in advance.
Alessandro