|
[Sponsors] |
November 9, 2016, 04:11 |
Porous region in chtMultiRegionSimpleFoam
|
#1 |
New Member
Join Date: Jul 2011
Posts: 18
Rep Power: 14 |
Hi,
is it possible to include a porous region in the chtMultiRegionSimpleFoam solver? I would like to simulate a channel where air flows through a block of metal foam and receives heat from a heated plate at one side of the porous zone. With the heat transfer coefficient, the fluid solid area density and the effective thermal conductivity of the porous zone being defined, such a calculation could be possible. But is it implemented in the solver? Best regards, Hugo |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
Unstabil Simulation with chtMultiRegionFoam | mbay101 | OpenFOAM Running, Solving & CFD | 13 | December 28, 2013 13:12 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 08:19 |