|
[Sponsors] |
May 8, 2017, 16:56 |
mapFields: RANS - LES
|
#1 |
Senior Member
Guilherme
Join Date: Apr 2017
Posts: 231
Rep Power: 10 |
Hi foamers,
I have a little doubt ... when I read: "For our discussion of mapFields we need to define a few terms. First, we say that the data is mapped from the source to the target. The fields are deemed consistent if the geometry and boundary types, or conditions, of both source and target fields are identical. The field data that mapFields maps are those fields within the time directory specified by startFrom/startTime in the controlDict of the target case. The data is read from the equivalent time directory of the source case and mapped onto the equivalent time directory of the target case.", on: https://cfd.direct/openfoam/user-guide/mapfields/ ... I understand that I need to first run RANS normally (what I'm already doing) and later, in LES, I add the mapFields function, am I correct? *The geometries and boundary conditions will be the same.* This is important to me because, according to the recommendations of: (https://www.sharcnet.ca/Software/Flu...ug/node560.htm) - STEP 1. Thanks |
|
Tags |
large eddy simulation, les model, mapfields, mapfieldsdict |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Model Switch, RANS to LES? | jennap223 | STAR-CCM+ | 0 | July 7, 2015 11:30 |
Transition RANS to LES during simulation | LorenzN | OpenFOAM Running, Solving & CFD | 4 | November 17, 2011 10:47 |
Laminar Flamlet RANS to LES | LB | FLUENT | 0 | September 5, 2007 05:35 |
Mapping RANS data onto an LES | christian | OpenFOAM Running, Solving & CFD | 0 | April 13, 2007 05:31 |
RANS results for LES | Li Yang | Main CFD Forum | 5 | June 17, 2002 05:34 |