|
[Sponsors] |
Lagrangian Particle Tracking using uncoupledKinematicParcelFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 18, 2017, 13:05 |
Lagrangian Particle Tracking using uncoupledKinematicParcelFoam
|
#1 |
New Member
Dominik Münch
Join Date: Oct 2017
Posts: 3
Rep Power: 9 |
Hey guys,
I'm trying to set up a case including particle tracking on an airfoil that derives from a calculation using rhoSimpleFoam with a k-omega-SST modelled turbulent flow in OF 4.1. The idea is to use the uncoupledKinematicParcelFoam solver to calculate a solution from the RANS-simulation done before. Has anyone ever used this combination especially including the non-transient possiblity of the uncoupledKinematicParcelFoam solver? My idea was to change the Hopper Tutorial from the icouncoupledKinematicParcelFoam so that it works steady-state and later on make it work for my own case. Anyone having some experience on doing stuff like this or having advice about this? Working cases or Tutorials on this issue are quite rare. |
|
Tags |
lagrangian particles, openfoam4.1, particle tracking, steady-state, uncoupledkinematicparcel |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lagrangian particle tracking cannot be run in parallel for the cases with AMI patches | Armin.Sh | OpenFOAM Running, Solving & CFD | 7 | March 28, 2021 23:33 |
Particle tracking error | alchem | OpenFOAM Bugs | 5 | May 6, 2017 17:30 |
[swak4Foam] Validation of swak4Foam for lagrangian particle tracking | nero235 | OpenFOAM Community Contributions | 13 | March 28, 2017 06:45 |
Lagrangian Particle Tracking in Eulerian-Eulerian Multiphase Flow | DarrenC | CFX | 5 | April 7, 2016 15:50 |
Ubuntu 12.10 + openfoam2.2.0 ==> paraview error message | peteryuan | OpenFOAM Installation | 6 | August 18, 2013 19:00 |