|
[Sponsors] |
Tutorial movingBlockRBF not working in foam-extend-4.1 |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 7, 2020, 04:04 |
Tutorial movingBlockRBF not working in foam-extend-4.1
|
#1 |
Senior Member
Sita Drost
Join Date: Mar 2009
Location: Arnhem, The Netherlands
Posts: 227
Rep Power: 18 |
Hi all,
I just tried running the movingBlockRBF tutorial in foam-extend-4.1 (Ubuntu 18.04), and it crashes after some 3.5 seconds, on a floating point exception. Now I happen to also have foam-extend-3.1 installed under Scientific Linux 7.3, and the very same tutorial runs fine here. So, does anyone know whether something in this tutorial has changed (I couldn't find anything up to now, but perhaps I just missed it)? Or could it be something in foam-extend-4.1? Many thanks, Sita |
|
February 23, 2020, 14:56 |
|
#2 |
New Member
kenan
Join Date: Sep 2012
Posts: 9
Rep Power: 13 |
Hi,
I also had a similar experience with the channelFoam tutorial (channel395). It blow out after a few steps. I still don't have any idea why is it so. Improperly updated tutorials while switching to new release, or a bug in the solver.. No idea. Does anyone has any idea some of the cases don't work in the new release? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] mesh airfoil NACA0012 | anand_30 | OpenFOAM Meshing & Mesh Conversion | 13 | March 7, 2022 17:22 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[blockMesh] error message with modeling a cube with a hold at the center | hsingtzu | OpenFOAM Meshing & Mesh Conversion | 2 | March 14, 2012 09:56 |
[Gmsh] Import problem | ARC | OpenFOAM Meshing & Mesh Conversion | 0 | February 27, 2010 10:56 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |