reverseBurner tutorial revisited

dlahaye · September 30, 2021, 11:40

We revisited the reserveBurner tutorial of chtMultiRegionFoam.

Details are in the report https://mega.nz/file/eBcxWKgJ#CXhpWd...5O3CHRBqIX6XKk

Input is most welcome.

Ash Kot · August 3, 2023, 20:30

This can be real life case scenario. I was wondering is it possible to couple with reactingFoam.
Instead of 'infinite fast one-step methane reaction', a PDF table based model. Using Chemkin mechanism to generate transport properties, thermodynamics properties, kinetic reactions based properties can be developed. Then these GRI3.0 files based properties are used to calculate the actual combustion scenario then after that heat flux generated from this combustion, how much heat transfer is calculated.
Something like that I would like to develop.
I don;t know if this is impossible or very difficult but I believe this can be achieved, although it'll take time to generate the results, but those will be very accurate!

dlahaye · August 4, 2023, 11:12

Pls. join the club!

https://doi.org/10.3390/fluids7060205

https://doi.org/10.3390/fluids7040124

September 30, 2021, 11:40	reverseBurner tutorial revisited	#1
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 736 Blog Entries: 1 Rep Power: 17	We revisited the reserveBurner tutorial of chtMultiRegionFoam. Details are in the report https://mega.nz/file/eBcxWKgJ#CXhpWd...5O3CHRBqIX6XKk Input is most welcome.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tutorial files	KITetima	FLUENT	8	November 23, 2019 16:05
AMI - Propeller Tutorial diverging	kingmaker	OpenFOAM Running, Solving & CFD	2	November 4, 2016 02:57
Tutorial For Workbench CFX Remesh	ashtonJ	CFX	2	April 26, 2014 21:19
Fluent Tutorial Guide Ch. 17: Non-Premixed Combust, THTR	MAE7509	FLUENT	0	January 22, 2014 20:59
STAR-CD Tutorial	shekhar aryal	STAR-CD	4	March 22, 2010 03:25

August 3, 2023, 20:30		#2
Ash Kot Member Ash Kotwal Join Date: Jul 2016 Location: North Dakota, USA Posts: 92 Blog Entries: 1 Rep Power: 9	This can be real life case scenario. I was wondering is it possible to couple with reactingFoam. Instead of 'infinite fast one-step methane reaction', a PDF table based model. Using Chemkin mechanism to generate transport properties, thermodynamics properties, kinetic reactions based properties can be developed. Then these GRI3.0 files based properties are used to calculate the actual combustion scenario then after that heat flux generated from this combustion, how much heat transfer is calculated. Something like that I would like to develop. I don;t know if this is impossible or very difficult but I believe this can be achieved, although it'll take time to generate the results, but those will be very accurate!

August 4, 2023, 11:12		#3
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 736 Blog Entries: 1 Rep Power: 17	Pls. join the club! https://doi.org/10.3390/fluids7060205 https://doi.org/10.3390/fluids7040124