|
[Sponsors] |
Velocity spike at reference pressure location in overPimpleDyMFoam model |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 18, 2020, 14:47 |
Velocity spike at reference pressure location in overPimpleDyMFoam model
|
#1 |
New Member
Harley Klein
Join Date: Jun 2009
Posts: 3
Rep Power: 17 |
All,
I'm running a simple, 2D overPimpleDyMFoam calculation with a closed domain, and there's a spike in the velocity field at the pressure reference location (see attached image showing Umag contour) that I haven't been able to suppress via changes to the solver/discretization settings. Has anyone seen/resolved such an issue in their work? Any help or suggestions would be greatly appreciated. I've also attached an archive containing the case files for review if someone wants to take a closer look at the model. |
|
May 5, 2022, 13:37 |
Same issue
|
#2 |
New Member
Rory CERBUS
Join Date: May 2022
Location: Bordeaux, France
Posts: 1
Rep Power: 0 |
I am having the same issue. I found this while trying to do a 3D simulation in a closed domain with and then moved to a 2D domain (slice of my original 3D one) and the issue remains. The spike is at the pRef location and I can't figure out how to get rid of it...
|
|
Tags |
mass conservation, overpimpledymfoam, pref, velocity and pressure |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Setting the height of the stream in the free channel | kevinmccartin | CFX | 12 | October 13, 2022 22:43 |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
Difficulty in calculating angular velocity of Savonius turbine simulation | alfaruk | CFX | 14 | March 17, 2017 07:08 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 07:20 |
error message | cuteapathy | CFX | 14 | March 20, 2012 07:45 |