Problem with adjointOptimisationFoam

Chris.W · September 28, 2020, 11:21

Hello,

I am quite new to OpenFoam and am currently writing my master thesis.
I would like to use adjointOptimisationFoam to optimise a rather complex geometry of an inner flow for pressure loss.
I have taken over boundary conditions from the tutorial case.

I get a conjugate solution for the normal equations for a first order solver. With the adjoint equations it converges at first and at some point the time step continuity error becomes very large and the calculation stops.
In the log I get the following error message (see picture)

Does anyone have any suggestions?
Thank you!
Chris

Error_Adjoint.jpg

Yuby · June 17, 2021, 18:03

I am also having the same issues. It would be really nice if we could get a bit of light here...

September 28, 2020, 11:21	Problem with adjointOptimisationFoam	#1
Chris.W New Member Christian Wagner Join Date: Sep 2020 Posts: 1 Rep Power: 0	Hello, I am quite new to OpenFoam and am currently writing my master thesis. I would like to use adjointOptimisationFoam to optimise a rather complex geometry of an inner flow for pressure loss. I have taken over boundary conditions from the tutorial case. I get a conjugate solution for the normal equations for a first order solver. With the adjoint equations it converges at first and at some point the time step continuity error becomes very large and the calculation stops. In the log I get the following error message (see picture) Does anyone have any suggestions? Thank you! Chris Error_Adjoint.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SU2-7.0.1 on ubuntu 18.04	hyunko	SU2 Installation	7	March 16, 2020 05:37
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 05:43
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 06:59
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 07:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 20:13

June 17, 2021, 18:03		#2
Yuby Member Rubén Join Date: Oct 2014 Location: Munich Posts: 47 Rep Power: 12	I am also having the same issues. It would be really nice if we could get a bit of light here...