rigid lid with wind effects

dalschouten · January 28, 2021, 05:57

Hi all,

I have a question regarding the addition of wind effects at the water surface. I want to model rigid lid open channel flow with SST k-omega model (with interFoam) and then add in a cloud of particles (DPMFoam).

I am not interested in water level changes, only the stress induced by the wind. How can I set this boundary at the water surface? Thank you

AliVali · September 27, 2023, 23:32

Quote:

Originally Posted by dalschouten

Hi all,

I have a question regarding the addition of wind effects at the water surface. I want to model rigid lid open channel flow with SST k-omega model (with interFoam) and then add in a cloud of particles (DPMFoam).

I am not interested in water level changes, only the stress induced by the wind. How can I set this boundary at the water surface? Thank you

HiDavid,

It is more than 2 years since your post. I was wondering if you have found a solution.

Thanks

January 28, 2021, 05:57	rigid lid with wind effects	#1
dalschouten New Member David Join Date: Jan 2021 Posts: 13 Rep Power: 5	Hi all, I have a question regarding the addition of wind effects at the water surface. I want to model rigid lid open channel flow with SST k-omega model (with interFoam) and then add in a cloud of particles (DPMFoam). I am not interested in water level changes, only the stress induced by the wind. How can I set this boundary at the water surface? Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to implement a rigid lid aproximation for a 2d flow?	Jaydi_21	Main CFD Forum	0	August 1, 2018 13:40
Rigid lid	SMY	FLOW-3D	0	May 13, 2017 15:30
simulating wind shear profile for a wind turbine--> How???	mohammad	CFX	14	August 25, 2014 09:09
simulating wind shear profile for a wind turbine--> How???	mohammad	FLUENT	0	April 14, 2012 23:54
Lid Thickness and Edge Effects in FloWorks	D.Castle	FloEFD, FloWorks & FloTHERM	3	June 19, 2009 04:51