 |
 |
 |
|
|
|
[Sponsors] | ||||
Surface tracking/capturing of a rising bubble becoming saturated with a liq component |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 4, 2021, 21:23
|
Surface tracking/capturing of a rising bubble becoming saturated with a liq component
|
#1 |
|
New Member
Darren Cappelli
Join Date: Feb 2021
Posts: 1
Rep Power: 0  |
Hi all,
I was hoping someone might know how to alter the interTrackFoam or bubbleInterTrackFoam solver in order to have a Dirichlet-Neumann coupled solver. The objective is to simulate a rising bubble consisting of dry air through liquid water and illustrate how the bubble becomes saturated with water. I would also like to simulate the evaporative cooling. Any advice would be appreciated. Thanks in advance, Darren |
|
|
|
|
|
| Tags |
| interfoam bubble, intertrackfoam, twophaseflow |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sliding of bubble on heated surface in nucleate boiling | Naaren | OpenFOAM | 9 | November 28, 2020 06:36 |
| OpenFOAM extended 4.0 Error with Multinode Set-up | Liweix | OpenFOAM Running, Solving & CFD | 1 | February 18, 2020 00:50 |
| [Gmsh] Problem with Gmsh | nishant_hull | OpenFOAM Meshing & Mesh Conversion | 23 | August 5, 2015 02:09 |
| CFX bubble simulation with free surface model | adma | CFX | 6 | February 3, 2006 11:17 |
| CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |
Linear Mode
