|
[Sponsors] |
August 5, 2021, 04:37 |
buoyantPimpleFoam
|
#1 |
New Member
anonymous
Join Date: Aug 2021
Posts: 1
Rep Power: 0 |
Dear all,
I am trying to simulate buoyantPimpleFoam, for the case where flow entered from inlet and leaves from another side (getting heated from walls at a higher temp). I am this error: No MRF models present Radiation model not active: radiationProperties not found Selecting radiationModel none No finite volume options present I can not understand what it means. Files are attached.https://drive.google.com/drive/folde...7f?usp=sharing Thanks |
|
August 5, 2021, 09:32 |
|
#2 |
Senior Member
Yann
Join Date: Apr 2012
Location: France
Posts: 1,233
Rep Power: 29 |
Hi,
Code:
No MRF models present Radiation model not active: radiationProperties not found Selecting radiationModel none No finite volume options present Those are not errors, the solver is just informing you about what optional models are selected or not. In your case you are running the solver without MRF model, radiation models nor fvOptions. There is nothing wrong here, unless you were trying to use one of these functions. You should post your log file and describe a bit more about what is your actual problem. Regards, Yann |
|
Tags |
buoyantpimplefoam, convection., heat transfair |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
buoyantPimpleFoam General Assumptions (thermophysical model, energy equation, etc) | AMK53 | OpenFOAM Running, Solving & CFD | 1 | October 23, 2018 06:30 |
buoyantPimpleFoam vs. Oliveira and Issa paper | MaryBau | OpenFOAM | 0 | June 25, 2018 15:00 |
buoyantPimpleFoam with thermalBaffle1D: strange temperature decrease | donQi | OpenFOAM Running, Solving & CFD | 0 | July 14, 2014 21:30 |
buoyantPimpleFoam Convergence Issues | joel.lehikoinen | OpenFOAM | 1 | December 5, 2013 15:58 |
Questions about buoyantPimpleFoam and rhoPimpleFoam | Mojtaba.a | OpenFOAM Running, Solving & CFD | 6 | August 1, 2012 05:50 |