|
[Sponsors] |
Solar load with view factors not giving qr and T variations |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 1, 2021, 05:06 |
Solar load with view factors not giving qr and T variations
|
#1 |
Member
Bushra Rasheed
Join Date: Dec 2020
Posts: 97
Rep Power: 5 |
Hi!
I have simulated a buoyantSimpleFoam case with solarLoad, it gives qr variations but does not give any temperature variations. I want to include view factors in order to have temperature profiles on surfaces. While using solar load+viewfactors, it asks for qr boundary condition. If I keep all patches as calculated with 0 value or as Code:
type greyDiffusiveRadiationViewFactor; qro uniform 0; value uniform 0; I want to know how to use irradiance calculated by solar load model via ray tracing as qr input for view factors. Or is there something else wrong in my case ? |
|
December 24, 2021, 07:55 |
|
#2 |
Member
Bushra Rasheed
Join Date: Dec 2020
Posts: 97
Rep Power: 5 |
Anyone? I can't solve this error
|
|
Tags |
buoyantsimplefoam, radiation, solar load, solar radiation, viewfactor |
Thread Tools | Search this Thread |
Display Modes | |
|
|