|
[Sponsors] |
December 9, 2021, 08:00 |
atmboundarylayerinletvelocity flowdir
|
#1 |
New Member
Nikolaos
Join Date: Oct 2019
Posts: 5
Rep Power: 6 |
Guys,
I have a Cubic domain and my velocity magnitude is 7.3 x and y coordinates are Vx = -6.5 m/s and Vy = -3.4 m/s Is this correct? My main question is how do we fill flowDir inlet { type atmBoundaryLayerInletVelocity; #include "include/ABLConditions" value uniform (-6.5 -3.4 0.); } kappa 0.40; // (HW. 358) Cmu 0.09; // (HW. 358) flowDir (0.89 0.46 0); // (HW:Fig. 1) zDir (0 0 1); // (HW:Fig. 1) Uref 7.3; // (HW:Table 1) Zref 7.0; // (HW:Table 1) z0 uniform 0.0002; // (HW:Table 1) d uniform 0.0; Last edited by nikorapk; December 9, 2021 at 09:06. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SimpleWindFoam TurbineSiting atmBoundaryLayerInletVelocity | Jochem | OpenFOAM | 17 | May 9, 2017 05:54 |