[nikorapk]

Guys,

I have a Cubic domain and my velocity magnitude is 7.3

x and y coordinates are Vx = -6.5 m/s and Vy = -3.4 m/s

Is this correct?
My main question is how do we fill flowDir


inlet
{
type atmBoundaryLayerInletVelocity;
#include "include/ABLConditions"
value uniform (-6.5 -3.4 0.);
}

kappa 0.40; // (HW. 358)
Cmu 0.09; // (HW. 358)
flowDir (0.89 0.46 0); // (HW:Fig. 1)
zDir (0 0 1); // (HW:Fig. 1)
Uref 7.3; // (HW:Table 1)
Zref 7.0; // (HW:Table 1)
z0 uniform 0.0002; // (HW:Table 1)
d uniform 0.0;