|
[Sponsors] |
Pressure Fluctuations Using cyclicAMI Boundary :v9 vs v2206 |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 21, 2022, 03:47 |
Pressure Fluctuations Using cyclicAMI Boundary :v9 vs v2206
|
#1 |
New Member
无
Join Date: Jul 2022
Posts: 8
Rep Power: 3 |
Differences in the calculation results of the versions:
The calculation results of the v9 version are normal,But the v2206 version has jumping fluctuations in pressure (with the same case parameter settings); |
|
September 21, 2022, 04:37 |
to upload attachments and images
|
#2 |
New Member
无
Join Date: Jul 2022
Posts: 8
Rep Power: 3 |
A horizontally placed circular tube with one inlet and one outlet; use the cyclic boundary "cyclicAMI" for inlet and outlet;
Change the boundary condition to "fiaedvalue", the calculation of side v2206 is normal; it is also normal to use v9 for calculation without modification; But running the cyclic boundary of "cyclicAMI" with v2206, there are fluctuations in pressure |
|
September 21, 2022, 04:44 |
|
#3 |
New Member
无
Join Date: Jul 2022
Posts: 8
Rep Power: 3 |
The above attachment is the v2206 version of the case, modified from v9, there is no problem with the operation, and the resulting pressure fluctuation is shown in the figure:
|
|
September 21, 2022, 21:57 |
|
#4 |
New Member
无
Join Date: Jul 2022
Posts: 8
Rep Power: 3 |
Maybe it's the choice of discrete format. I tried different divSchemes and got slightly better results, but the pressure still fluctuates.
It stands to reason that the pressure should be almost stable at 1e5 ,and shouldn't jump from 1.1e5 to 1.3e5 to 1.2e5 again...;confused... |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fail to converge when solving with a fabricated solution | zizhou | FLUENT | 0 | March 22, 2021 06:33 |
Table bounds warnings at: END OF TIME STEP | CFXer | CFX | 4 | July 16, 2020 23:44 |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
Question about adaptive timestepping | Guille1811 | CFX | 25 | November 12, 2017 17:38 |
Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |