CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

floating objects using Stokes I case

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 11, 2024, 07:51
Default floating objects using Stokes I case
  #1
New Member
 
Thuraya Kaadan
Join Date: Dec 2014
Location: Nagoya, Japan
Posts: 3
Rep Power: 11
Thuraya Kaadan is on a distinguished road
I am trying to create a case where there is a floating object that moves with the waves generated by Stokes I.
I used the Stokes I case to start with. I created two boxes in the field, the right one represents a static non-floating object, and the left represents a floating boat.

before adding any buoyancy conditions from the floating body case, I tried to run the simulation as it i with the two objects acting as a wall.
the 0 folder consists of U, p_rgh and alpha.water
the system folder is the same except for that I changed the blockMeshDict and polyMesh with a polyMesh generated by ideasUnvToFoam and checked the mesh --> no problems.
The initial conditions are as in the attached case.

the question is: why am I not able to generate waves though the boundary conditions are the same as the Stokes I case.

I am attaching the case file with this post and some photos of the final results.
Thuraya Kaadan is offline   Reply With Quote

Old   February 11, 2024, 20:52
Default link to case files
  #2
New Member
 
Thuraya Kaadan
Join Date: Dec 2014
Location: Nagoya, Japan
Posts: 3
Rep Power: 11
Thuraya Kaadan is on a distinguished road
https://drive.google.com/file/d/1SbN...ew?usp=sharing
Thuraya Kaadan is offline   Reply With Quote

Reply

Tags
floating body, interfoam interdymfoam, stokes 1st wave

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two coupled floating objects zweihuehner REEF3D 2 September 6, 2022 11:06
Floating point exception error when rotate the geometry zyfsoton OpenFOAM Running, Solving & CFD 1 June 20, 2022 05:49
Pressure instabilities with interDyMFoam for the floatingObject case nbadano OpenFOAM Running, Solving & CFD 15 October 15, 2021 06:35
[DesignModeler] DesignModeler Scripting: How to get Full Command Access ANT ANSYS Meshing & Geometry 53 February 16, 2020 15:13
Incompressible Navier Stokes Test Case suman91 SU2 3 October 20, 2014 15:38


All times are GMT -4. The time now is 20:30.