[bastil]

Dear all,

I am struggling to run meshes imported from FLUENT including interfaces. AFAIK there are two options:

1. stitchMesh -> use 1.5-dev
2. ggi -> use 1.5-dev

First option works on some vanilla cases but fails on my real life geometries with various errors and large memory consumption. Could not get it running on all types of my interfaces. So I tried ggi and I am struggling:

Starting time loop

[node013:00375] *** Process received signal ***
[node013:00375] Signal: Floating point exception (8)
[node013:00375] Signal code: (-6)
[node013:00375] Failing at address: 0xb5a00000177
[node013:00375] [ 0] /lib64/libc.so.6 [0x2b57acb3ec10]
[node013:00375] [ 1] /lib64/libc.so.6(gsignal+0x35) [0x2b57acb3eb95]
[node013:00375] [ 2] /lib64/libc.so.6 [0x2b57acb3ec10]
[node013:00375] [ 3] /opt/OpenFOAM/OpenFOAM-1.5-dev/lib/linux64GccDPOpt/libOpenFOAM.so(_ZN4Foam6divid eERNS_5FieldIdEERKNS_5UListIdEES6_+0xa1) [0x2b57ac2f0c
71]

This is a simpleFOAM job in parallel. I guess I have to make sure interface is on one CPU? May this be the problem? How can I ensure this?

Are there furter options to handle FLUENT interfaces?

Regards