|
[Sponsors] |
Problems of a structural solver that works in an updated configuration |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 30, 2008, 06:58 |
Hello again,
I tried the bo
|
#1 |
Member
feng wang
Join Date: Mar 2009
Posts: 67
Rep Power: 17 |
Hello again,
I tried the boundary conditions I mentioned in (3), and I end up with something like: . . . . . Time = 10 Setting traction on solid patch ICCG: Solving for DUx, Initial residual = 0, Final residual = 0, No Iterations 0 ICCG: Solving for DUy, Initial residual = 0, Final residual = 0, No Iterations 0 ICCG: Solving for DUz, Initial residual = 0, Final residual = 0, No Iterations 0 ExecutionTime = 0.08 s . . . . . . I think the problem is due to no load on the boundaries. I am sure the pressure increment is calculated correctly, the problem may lie in setting the pressure("setPressure.H"). could anyone shed some light on this problem? Kind regards feng |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How solver works? | John | Fidelity CFD | 1 | February 24, 2006 09:23 |
How solver works? | John | FLUENT | 2 | January 27, 2006 13:35 |
How solver works? | John | CFX | 1 | January 27, 2006 12:48 |
How solver works? | John | Phoenics | 1 | January 27, 2006 12:25 |
How solver works? | John | Siemens | 1 | January 27, 2006 04:10 |