|
[Sponsors] |
Axial 2D calculation in simpleFoam prblem with convergence |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 11, 2005, 17:50 |
At first I make 2D planar case
|
#1 |
New Member
Andriy Rybakov
Join Date: Mar 2009
Posts: 9
Rep Power: 17 |
At first I make 2D planar case restangular geometry - everething OK.
Then I try to caclulate axial 2D geometry with help of simpleFoam (boundary condition is equivalent to planar). I use wedge, empty for axis etc., make with blockMesh geometry. (I can see it in paraFoam - everything is OK with geometry). But when I try to calculate, it don't converge. Some first steps are OK, then oops. I try to change relaxation factors - it is don't help. In this case I see that program calculate Vz (but in 2D planar - don't). Must I change some more parameters for axial case? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SimpleFoam convergence problems | brahim | OpenFOAM Running, Solving & CFD | 20 | June 9, 2015 09:09 |
SimpleFoam Convergence problem | skabilan | OpenFOAM Running, Solving & CFD | 6 | May 31, 2013 03:21 |
SimpleFoam solution convergence pattern | philippose | OpenFOAM Running, Solving & CFD | 0 | June 26, 2008 14:18 |
Axial Velocity Calculation | Roux | CFX | 0 | May 12, 2008 09:37 |
SimpleFoam convergence problems | schnitzlein | OpenFOAM Running, Solving & CFD | 6 | June 24, 2005 09:51 |