|
[Sponsors] |
April 10, 2009, 04:47 |
buoyantSimpleFoam error message
|
#1 |
New Member
Kyian Barrat
Join Date: Apr 2009
Posts: 25
Rep Power: 17 |
Hello Foamers,
Im a beginner. I use OpenFoam 1.5 on Ubunto... I would like to use the solver buoyantSimpleFoam for a case, so I started the tutorial. But i have this error message when i launch the solver ------------------------------------------------------------------ Create time Create mesh for time = 0 Reading environmentalProperties Reading thermophysical properties Selecting thermodynamics package hThermo<pureMixture<constTransport<specieThermo<hC onstThermo<perfectGas>>>>> Reading field U Reading/calculating face flux field phi Creating turbulence model Selecting RAS turbulence model kEpsilon kEpsilonCoeffs { Cmu 0.09; C1 1.44; C2 1.92; C3 0.85; alphah 1; alphak 1; alphaEps 0.76923; } Calculating field g.h Creating field pd Starting time loop Time = 1 DILUPBiCG: Solving for Ux, Initial residual = 1, Final residual = 4.95158e-06, No Iterations 3 DILUPBiCG: Solving for Uy, Initial residual = 1, Final residual = 7.32619e-06, No Iterations 3 DILUPBiCG: Solving for Uz, Initial residual = 1, Final residual = 4.95158e-06, No Iterations 3 #0 Foam::error:rintStack(Foam::Ostream&) in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so" #1 Foam::sigFpe::sigFpeHandler(int) in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so" #2 ?? in "/lib/libc.so.6" #3 Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so" #4 void Foam::divide<Foam::fvsPatchField, Foam::surfaceMesh>(Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh>&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&) in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/buoyantSimpleFoam" #5 Foam::tmp<Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> > Foam:perator/<Foam::fvsPatchField, Foam::surfaceMesh>(Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::tmp<Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> > const&) in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/buoyantSimpleFoam" #6 main in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/buoyantSimpleFoam" #7 __libc_start_main in "/lib/libc.so.6" #8 Foam::regIOobject::readIfModified() in "/DATA/Softs/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/buoyantSimpleFoam" Floating point exception ---------------------------------------------------- I think it's probably due to the installation of the librairies, but im not really into it, so i would like to have a confirmation and the solution to solve the problem.. Thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BuoyantSimpleFoam tutorial error | erydj | OpenFOAM Installation | 2 | June 23, 2011 05:46 |
BuoyantSimpleFoam | amitshah | OpenFOAM Running, Solving & CFD | 4 | June 3, 2009 06:04 |
buoyantSimpleFoam Message error | Khelian973 | OpenFOAM Running, Solving & CFD | 8 | June 2, 2009 13:26 |
BuoyantSimpleFoam Channel problem | prashant24983 | OpenFOAM Running, Solving & CFD | 7 | September 18, 2008 04:50 |
Error in buoyantSImpleFoam solver | antopnieta | OpenFOAM Running, Solving & CFD | 2 | January 18, 2008 07:30 |