|
[Sponsors] |
solid/solid heat transport model with chtMultiRegionFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 3, 2011, 11:22 |
solid/solid heat transport model with chtMultiRegionFoam
|
#1 |
Senior Member
Mirko Vukovic
Join Date: Mar 2009
Posts: 159
Rep Power: 17 |
Hello,
I am attaching two versions of the same solid/solid heat transport problem. One works, the other does not. In the working one, I use the compressible::tubulentTemperatureCoupledBaffle BC, while in the other one, I use solidWallHeatFluxTemperatureCoupled BC. The latter one does not work, with the error that this BC is not permissible for directCoupledWalls. What is wrong with the latter one? You can run either of them with Allclean and Allrun. Thank you, Mirko |
|
May 3, 2011, 12:40 |
|
#2 |
Member
MSR CHANDRA MURTHY
Join Date: Mar 2009
Posts: 33
Rep Power: 17 |
It is a good observation. from the source code, it appears that the former is implemented by inheriting from fixedValueFvPatchField and the later one is done with mixedFvPatchScalarField. however, in the former case, K*(dT/dX)_1=K*(dT/dX)_2 is maintained, which seems to be tangible coupled bcs. in the later case, it is switching between zeroGradient and neighbourvalue, i dont understand how this is physically sound.
|
|
May 4, 2011, 13:08 |
|
#3 | |
Senior Member
Mirko Vukovic
Join Date: Mar 2009
Posts: 159
Rep Power: 17 |
Quote:
|
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Simulation of a single bubble with a VOF-method | Suzzn | CFX | 21 | January 29, 2018 00:58 |
Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
question about Heat transfer between two phases with VOF model | sooroo3 | FLUENT | 0 | February 15, 2011 03:24 |
Turbulent Heat Transfer Transport Equation | Flo.duck | Main CFD Forum | 0 | May 6, 2009 03:37 |
Water vapour condensation in CFX-5.7.1 | hdj | CFX | 1 | November 27, 2005 07:15 |