OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Problems with Unsteady simulations using LRR Model in transientSimpleFoam barath.ezhilan	July 25, 2009 13:58 by barath.ezhilan	1	1,652
LRR turbulence model gianlu	July 25, 2009 11:27 by barath.ezhilan	1	1,765
Create internal faces after createPatch linnemann	July 24, 2009 04:00 by linnemann	3	1,943
Heat transfer in liquid water suggestions for chioce of solver ( 1 2) hkb	July 23, 2009 08:16 by gschaider	25	6,203
initial velocity field with a pressure difference sven82	July 23, 2009 05:05 by kjetil	2	1,346
couplingFactor in LRR turbulence model natrask	July 22, 2009 16:55 by natrask	0	1,333
timeVaryingUniformTotalPressure boundary condition nishant_hull	July 22, 2009 11:56 by nishant_hull	1	1,392
zeroGradient pressure and moving mesh kassiotis	July 22, 2009 09:28 by kassiotis	0	1,634
Time Steps gets smaller and smaller titio	July 22, 2009 08:19 by s.sivakumar	1	1,806
snappyMesh Motor Bike case for simpleFoam solver s.sivakumar	July 22, 2009 08:00 by s.sivakumar	0	1,514
Forces in axisymmetric cases linnemann	July 22, 2009 01:42 by linnemann	1	1,187
simulate flat air passage ways Fonss	July 21, 2009 23:54 by Fonss	2	1,310
rhoSimpleform error andesameer	July 21, 2009 23:28 by andesameer	0	1,062
Restart of case crashes feijooos	July 21, 2009 11:04 by feijooos	0	1,232
Laminar field as initial state for turbulent two phase pipe flow kjetil	July 21, 2009 09:15 by kjetil	3	2,655
Problem in simulation titio	July 21, 2009 07:28 by titio	0	1,338
What's the remedy for that!!! keishawillstone	July 21, 2009 05:53 by keishawillstone	2	1,153
Injector configuration issues coastal593	July 21, 2009 05:28 by huoyinghw	14	2,521
MultiphaseInterFoam virginie_e	July 21, 2009 03:37 by AlGates	1	1,949
dieselFoam: Volume fraction limitation? Rachel	July 21, 2009 02:09 by alberto	3	2,152
Combining BCs: wall - outlet. Boundary layer disappears MartinaF	July 20, 2009 18:14 by MartinaF	1	2,361
Problem setting with chtmultiregionFoam Antonin	July 20, 2009 06:52 by henrik	3	2,187
dieselFoam- Density and mass flow rate Rachel	July 20, 2009 06:36 by Rachel	1	2,100
case in 1.5 can not run in 1.5-dev? waynezw0618	July 20, 2009 05:57 by henrik	1	1,052
What is neg(s)? sandy	July 20, 2009 02:43 by henrik	1	2,287
Doubt in term representation in the fvSchemes dictionary titio	July 17, 2009 13:21 by titio	0	1,305
Waves in simple channel taranov	July 17, 2009 06:59 by taranov	0	1,665
VOF method +surface tension yapalparvi	July 17, 2009 03:56 by jploz	5	2,875
Howto mass source in interFoam caw	July 16, 2009 06:59 by isabel	6	4,908
dieselFoam: how to implement thermo for liquid/gas continuous phase natrask	July 16, 2009 05:37 by Rachel	1	1,621
channelOodles postChannel jeffkenning	July 16, 2009 05:19 by zebu83	1	1,926
twoPhaseProperties feijooos	July 16, 2009 04:21 by isabel	1	1,471
twoPhaseEulerFoam solver amscosta	July 15, 2009 17:38 by silva	2	1,468
dnsFoam cfdmarkus	July 15, 2009 06:26 by cfdmarkus	0	1,480
BoussinesqApproximation for incompressible flow ( 1 2) henry	July 15, 2009 03:54 by prabhu	31	5,955
Problem with the thermophysical ivanyao	July 14, 2009 09:45 by mvoss	1	1,438
rhoSimpleFoam andesameer	July 14, 2009 02:34 by andesameer	0	1,205
Getting Y vishal	July 13, 2009 15:33 by fightingfalcon23	7	1,400
turbFoam solver with heat-transfer? svens	July 13, 2009 12:09 by svens	8	1,668
transient heat transfer - radiation model - implausible results thomasduerr	July 13, 2009 10:03 by thomasduerr	0	1,687

Read this first: How to ask a question on the forums

Page 419 of 481

419

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 03:30.