Verification of melting and solidification three phase model

kuechenrole · May 22, 2015, 03:40

Hello there,

does anybody know a common test case, which consider a phase change due to melting or solidification and the propagation of the PCM (phaseChangeMaterial). I want to benchmark my solver.

The frame is a casting process.

Thanks,

ole

ahmmedshakil · November 5, 2015, 23:08

Ole Richter,

Use gallium melting case.

alexeym · November 6, 2015, 02:05

@kuechenrole

http://ejde.math.txstate.edu/conf-pr.../alexiades.pdf
http://www.math.utk.edu/~vasili/va/d...-B44.sep03.pdf

Original Gau & Viskanta experimental paper is in general a) harder to find, b) in general is not reproducible with continuous 2D simulation due to experimental procedure.

fabian_roesler · December 11, 2015, 08:56

Right, the Gau and Viskanta paper is nice but actually not good for validation purpose. I read the article and as you can not really distinct between liquid and solid phase of gallium, they stopped the experiment after different times, let the liquid gallium flow out of the cavity and took photos of the remaining solid gallium. This was done for several time steps and so the melt front could be observed over time.
There was another author - I can't remember the name of - who oberved the melt front with radio spectroscopy.
If you do not have to stick to pure substances with a melting temperature rather than a melting region, you could go for paraffin. I collected several articles like the Gau and Viskanta article in my thesis:

Modellierung und Simulation der Phasenwechselvorgänge in makroverkapselten latenten thermischen Speichern

Thermodynamik: Energie - Umwelt - Technik , Bd. 24
Fabian Rösler
ISBN 978-3-8325-3787-6

Cheers

Fabian

anu4anusai · May 10, 2020, 11:47

Dear All,

I a new OF user.

I am trying to simulate the freezing of droplet impacting on cold surface. Can anyone please suggest solver that can be used for this problem?

May 22, 2015, 03:40	Verification of melting and solidification three phase model	#1
kuechenrole New Member Ole Richter Join Date: Jun 2013 Posts: 11 Rep Power: 12	Hello there, does anybody know a common test case, which consider a phase change due to melting or solidification and the propagation of the PCM (phaseChangeMaterial). I want to benchmark my solver. The frame is a casting process. Thanks, ole

November 6, 2015, 02:05		#3
alexeym Senior Member Alexey Matveichev Join Date: Aug 2011 Location: Nancy, France Posts: 1,938 Rep Power: 38	@kuechenrole http://ejde.math.txstate.edu/conf-pr.../alexiades.pdf http://www.math.utk.edu/~vasili/va/d...-B44.sep03.pdf Original Gau & Viskanta experimental paper is in general a) harder to find, b) in general is not reproducible with continuous 2D simulation due to experimental procedure. Luttappy likes this.

May 10, 2020, 11:47	droplet freezing on impacting cold surface modeling	#5
anu4anusai New Member Anusai Ramankutty Join Date: Nov 2019 Posts: 9 Rep Power: 6	Dear All, I a new OF user. I am trying to simulate the freezing of droplet impacting on cold surface. Can anyone please suggest solver that can be used for this problem? XinXin likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solidification model of binary alloy in Ansys 14.5	BK90	FLUENT	21	November 20, 2021 07:12
melting or solidification model in CFX	jasonchang	CFX	5	January 31, 2018 06:33
UDF for heat source in Soldification and melting model	karthik82	Fluent UDF and Scheme Programming	6	June 30, 2014 02:45
UDF for heat source in Soldification and melting model	karthik82	FLUENT	1	June 23, 2014 05:39
Melting and Solidification enthalpyporosity technique	zakifoam	OpenFOAM Running, Solving & CFD	3	July 12, 2007 10:18

November 5, 2015, 23:08		#2
ahmmedshakil Senior Member Mohammad Shakil Ahmmed Join Date: Oct 2012 Location: AUS Posts: 137 Rep Power: 14	Ole Richter, Use gallium melting case.

December 11, 2015, 08:56		#4
fabian_roesler Senior Member Fabian Roesler Join Date: Mar 2009 Location: Germany Posts: 213 Rep Power: 18	Right, the Gau and Viskanta paper is nice but actually not good for validation purpose. I read the article and as you can not really distinct between liquid and solid phase of gallium, they stopped the experiment after different times, let the liquid gallium flow out of the cavity and took photos of the remaining solid gallium. This was done for several time steps and so the melt front could be observed over time. There was another author - I can't remember the name of - who oberved the melt front with radio spectroscopy. If you do not have to stick to pure substances with a melting temperature rather than a melting region, you could go for paraffin. I collected several articles like the Gau and Viskanta article in my thesis: Modellierung und Simulation der Phasenwechselvorgänge in makroverkapselten latenten thermischen Speichern Thermodynamik: Energie - Umwelt - Technik , Bd. 24 Fabian Rösler ISBN 978-3-8325-3787-6 Cheers Fabian