 |
 |
 |
|
|
|
[Sponsors] | ||||
interFoam: validation of interFoam for drop production in a microfluidic device |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 25, 2017, 15:10
|
interFoam: validation of interFoam for drop production in a microfluidic device
|
#1 |
|
New Member
Join Date: Jan 2013
Posts: 2
Rep Power: 0  |
Hello all,
I would like to share our work on droplet production in microfluidic T-junction. In this work, we have performed 3D simulations in parallel to validate the performance of interFoam solver. The title of the paper is : "Volume-of-fluid simulations in microfluidic T-junction devices: Influence of viscosity ratio on droplet size". Here is the link of the paper: http://aip.scitation.org/doi/pdf/10.1063/1.4978801 Best regards, |
|
|
|
|
| Tags |
| drop formation, interfoam, microfluidic, openfoam |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| interFoam - validation for bubble/droplet flows in microfluidics | duongquaphim | OpenFOAM Verification & Validation | 54 | February 13, 2023 23:46 |
| interFoam validation for coolant flow in fusion Reactor | vipin1431 | OpenFOAM Verification & Validation | 2 | March 23, 2016 01:10 |
| [ANSYS Meshing] Microfluidic Device Meshing | mlau3 | ANSYS Meshing & Geometry | 1 | July 25, 2014 00:19 |
| CFX problem in ubuntu (linux) | Vigneshramaero | CFX | 0 | July 13, 2012 10:22 |
| CFX-Pre problem, pls help!!! | cth_yao | CFX | 0 | February 17, 2012 00:52 |
5Likes
Threaded Mode
