Buckley-Leverett Problem

CFDtoy · September 5, 2012, 17:55

Hello,

Has openFoam been used to solve Buckley-Leverett problem? Can anyone point me to references - what solver procedure and assumptions used?

--
CFDtoy

Cyp · September 6, 2012, 03:02

I presented a solver I made to simulate two-phase flow in porous media (IMPES algorithm) at the last OpenFOAM workshop.

Since the openfoamworkshop website is currently down, I can send you the presentation by e-mail if you need it.

Regards,
Cyp

CFDtoy · September 6, 2012, 10:50

Hi Cyp,

Thank you very much for your comment. Please send it to cfdtoy@gmail.com

Kr,
CFDtoy

Quote:

Originally Posted by Cyp

I presented a solver I made to simulate two-phase flow in porous media (IMPES algorithm) at the last OpenFOAM workshop.

Since the openfoamworkshop website is currently down, I can send you the presentation by e-mail if you need it.

Regards,
Cyp

Rafael · December 17, 2012, 14:07

Hi Cyp,

you are using some type of wellbore pressure coupling for source terms in this problem? Like on Peaceman model?

thanks!

norkistar · December 20, 2012, 00:14

Hi Cyp, Could you please also send me your solver and some description about it?

Best regards!

norkistar

norkistar · December 20, 2012, 00:36

Hi cyp, my email is xubinntu@gmail.com

Lalit · March 12, 2013, 02:27

Hi Cyp,

can you please also send me your solver. my email is id Lschaudhari [at] gmail.com

Thanks in advance
Lalit

September 5, 2012, 17:55	Buckley-Leverett Problem	#1
CFDtoy Senior Member CFDtoy Join Date: Mar 2009 Location: United States Posts: 145 Blog Entries: 2 Rep Power: 17	Hello, Has openFoam been used to solve Buckley-Leverett problem? Can anyone point me to references - what solver procedure and assumptions used? -- CFDtoy __________________ CFDtoy

September 6, 2012, 03:02		#2
Cyp Senior Member Cyprien Join Date: Feb 2010 Location: Stanford University Posts: 299 Rep Power: 18	I presented a solver I made to simulate two-phase flow in porous media (IMPES algorithm) at the last OpenFOAM workshop. Since the openfoamworkshop website is currently down, I can send you the presentation by e-mail if you need it. Regards, Cyp CFDtoy likes this.

December 17, 2012, 14:07		#4
Rafael New Member Rafael Cabral de Moura Join Date: Oct 2009 Location: Brasil Posts: 8 Rep Power: 16	Hi Cyp, you are using some type of wellbore pressure coupling for source terms in this problem? Like on Peaceman model? thanks! Last edited by Rafael; December 18, 2012 at 19:57.

March 12, 2013, 02:27		#7
Lalit New Member Lalit Join Date: May 2009 Posts: 7 Rep Power: 16	Hi Cyp, can you please also send me your solver. my email is id Lschaudhari [at] gmail.com Thanks in advance Lalit Last edited by Lalit; March 12, 2013 at 02:28. Reason: added email id

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
area does not match neighbour by ... % -- possible face ordering problem	St.Pacholak	OpenFOAM	10	February 7, 2024 21:50
conduction problem	venkataramana	OpenFOAM	3	December 1, 2013 07:30
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Problem Importing Geometry ProE to CFX	fatb0y	CFX	3	January 14, 2012 19:42
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

December 20, 2012, 00:14		#5
norkistar New Member Bin Xu Join Date: Apr 2012 Location: Singapore Posts: 23 Rep Power: 14	Hi Cyp, Could you please also send me your solver and some description about it? Best regards! norkistar

December 20, 2012, 00:36		#6
norkistar New Member Bin Xu Join Date: Apr 2012 Location: Singapore Posts: 23 Rep Power: 14	Hi cyp, my email is xubinntu@gmail.com