 |
 |
 |
|
|
|
[Sponsors] | ||||
combustion simulations from cmcPimpleFoam results |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 9, 2013, 07:05
|
combustion simulations from cmcPimpleFoam results
|
#1 |
|
Senior Member
Join Date: Jan 2013
Posts: 372
Rep Power: 15  |
Hi there,
I used the solver cmcPimpleFoam to get the converged results but they are cold flow. Based on these cold flow results, I would like to do a combustion simulation using fireFoam. When I start from the cold flows, the Co number in the combustion simulation is always increased to a larger number. Does anybody how to achieve the stability for this kind of simulations? Thank you in advance. |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem: Very long "write" time (~2h-3h) for results and transient results | Shawn_A | CFX | 16 | April 12, 2016 20:49 |
| Combustion problem | alok.cd | FLUENT | 2 | April 23, 2013 08:41 |
| Experimental results do not match with simulation results | robingilbert | OpenFOAM Verification & Validation | 4 | January 23, 2012 17:39 |
| Particles affecting radiation in combustion chamber | bharath | CFX | 0 | September 23, 2011 21:41 |
| Multiresolution + Turbulence + Combustion | Raul | CFX | 0 | March 18, 2005 07:53 |
Linear Mode
