How to use "function" under contorlDic to calculate particles concentration (kg/m3)

chpjz0391 · May 23, 2016, 04:57

Hi, all,
Now I am using simpleReactingParcelFoam to simulate particles distribution. The simulation works well. But I want to get the particles concentration for each area (kg/m3) . Can I achieve this by using the function under controDic?

Dipsomaniac · May 24, 2016, 09:03

Hi Ping

Have a look at the sampleDict for an indication of the functions which can be used. Looks like you could use a point cloud if you needed to sample over region.

https://github.com/OpenFOAM/OpenFOAM...ple/sampleDict

Regards,
Brian

May 23, 2016, 04:57	How to use "function" under contorlDic to calculate particles concentration (kg/m3)	#1
chpjz0391 Member Ping Chang Join Date: Feb 2016 Location: Perth Posts: 93 Rep Power: 10	Hi, all, Now I am using simpleReactingParcelFoam to simulate particles distribution. The simulation works well. But I want to get the particles concentration for each area (kg/m3) . Can I achieve this by using the function under controDic?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Concentration of particles in sub-volume	kathryn	FLUENT	0	September 20, 2010 07:58
concentration of particles	scarecrow	FLUENT	3	August 19, 2010 04:02
How to calculate suspended sediment concentration ?	fang	FLOW-3D	4	January 20, 2010 11:28
How to calculate the particle concentration?	Ken	Siemens	1	April 19, 2007 12:10
How to calculate the concentration of DPM (Urgent)	ALEX	FLUENT	6	January 23, 2006 23:15

May 24, 2016, 09:03		#2
Dipsomaniac Member Brian Willis Join Date: Mar 2011 Location: Cape Town, South Africa Posts: 58 Rep Power: 15	Hi Ping Have a look at the sampleDict for an indication of the functions which can be used. Looks like you could use a point cloud if you needed to sample over region. https://github.com/OpenFOAM/OpenFOAM...ple/sampleDict Regards, Brian