|
[Sponsors] |
How to interpret an error message in Openfoam. |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 15, 2020, 05:51 |
How to interpret an error message in Openfoam.
|
#1 | |
New Member
Join Date: Dec 2020
Posts: 5
Rep Power: 5 |
Hi everyone,
I am new on OpenFoam, but I started using this open source software as it seems to provide an infinite amount of possibilities for future developpement of fluid mechanism. I read and watched lots of tutorials and threads beforehands, but when I started using this software, I had an error. It may seems like a simple issue but so what can I do with my error ? I searched on the internet where to find the error source, tried to solve the error itself ... But nothing was corresponding and I found myself in a ditch as I didn't know how to solve the problem by myself. Then I had two choices, create a post for my actual problem, or create a post for all my future problems and for all the other beginners, and here it is. I WANT TO KNOW HOW TO SOLVE MY ERRORS BY MYSELF. I found lots of tutorials and documents about how to use Openfoam but none really usefull about how to solve an error. I told you already, I am new on this software and I don't really know much about the syntax and structure of the folders. I would like to know if someone know where I can find a guide that can help me understand my problems and how to solve them myself. Here is an exemple of what I mean, illustrating an error I got back then using a software based of Openfoam: Quote:
I roughly saw "Foam::adaptiveFvMesh::checkEightAnchorPoints" , so I searched and found the location of the document in the Openfoam library and some leads, but nothing more. I am not looking for a way th solve this problem but a way to solve all my future problems without going on this forum to post my problems. Does someone know where I can find some guidelines about how to interpret and solve my modeling problems ? Thanks everyone for reading all my rambling. Have a nice week. Guillaume. |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Frequently Asked Questions about Installing OpenFOAM | wyldckat | OpenFOAM Installation | 3 | November 14, 2023 11:58 |
OpenFOAM Training, London, Chicago, Munich, Sep-Oct 2015 | cfd.direct | OpenFOAM Announcements from Other Sources | 2 | August 31, 2015 13:36 |
OpenFOAM Foundation Releases OpenFOAM v2.3.0 | opencfd | OpenFOAM Announcements from OpenFOAM Foundation | 3 | December 23, 2014 03:43 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
64bitrhel5 OF installation instructions | mirko | OpenFOAM Installation | 2 | August 12, 2008 18:07 |