Simulation of Fluidized Bed Dryer

rimosirsak · August 27, 2021, 00:07

Hello Foamers!

I am very new to CFD and OpenFoam. For my Project I have to design a fluidised Bed Dryer. I am trying to use the tutorial file of fluidised bed using multiphaseEuler solver. I am facing two Problems.

1. first i am trying to simply heat the solid material. I have air at 323K and solid at 298K. I am not understanding how to change the boundary condition for my case. Do I need to change the heat transfer model also?

2. Second how can i define moisture into that.

Any leads would be very helpful.

Thanks in advance.

Ultimate1234 · August 20, 2023, 03:56

Hello,
I am also trying the same can you give me some insight how have you done it.

August 27, 2021, 00:07	Simulation of Fluidized Bed Dryer	#1
rimosirsak New Member Sirsak Banerjee Join Date: Aug 2021 Posts: 1 Rep Power: 0	Hello Foamers! I am very new to CFD and OpenFoam. For my Project I have to design a fluidised Bed Dryer. I am trying to use the tutorial file of fluidised bed using multiphaseEuler solver. I am facing two Problems. 1. first i am trying to simply heat the solid material. I have air at 323K and solid at 298K. I am not understanding how to change the boundary condition for my case. Do I need to change the heat transfer model also? 2. Second how can i define moisture into that. Any leads would be very helpful. Thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Divergence in gas-solid fluidized bed simulation	Lyapunov	Fluent Multiphase	1	January 9, 2017 20:43
Need guidance and tips about a fluidized bed reactor gasifier simulation	cmigueis	OpenFOAM	2	April 22, 2015 08:54
Simulation restart with packet sediment bed	dirksen	FLOW-3D	1	February 18, 2015 16:18
Tutorial on Fluidized Bed has convergence issues	luca.delbene	STAR-CCM+	0	December 2, 2014 06:05
Questions about gas-solid fluidized bed simulation	Sinferm	FLUENT	1	January 31, 2007 14:54

August 20, 2023, 03:56		#2
Ultimate1234 New Member Maharghya Dyuti Das Join Date: May 2023 Posts: 15 Rep Power: 3	Hello, I am also trying the same can you give me some insight how have you done it.