|
[Sponsors] |
Flow inside a converging nozzle with Pimplefoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 12, 2022, 04:33 |
Flow inside a converging nozzle with Pimplefoam
|
#1 |
New Member
badShinchan
Join Date: Apr 2022
Posts: 3
Rep Power: 4 |
I am attaching the case file. Whenever i try to run, it shows the error.
(attached below) 277999892_1089769345204759_900859964713374417_n.jpg 277959553_2840606089574810_867235461933461332_n.jpg I tried to run the simulation with " mpirun -np 2 pimpleFoam -parallel " as I have decomposed 2 processors. no velocity is known. the inlet and outlet pressure are defined in the P file the 0/U /*--------------------------------*- C++ -*----------------------------------*\ ========= | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox \\ / O peration | Website: https://openfoam.org \\ / A nd | Version: 8 \\/ M anipulation | \*---------------------------------------------------------------------------*/ FoamFile { version 2.0; format ascii; class volVectorField; object U; } // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // dimensions [0 1 -1 0 0 0 0]; internalField uniform (0 0 0); boundaryField { inlet { type zeroGradient; } outlet { type zeroGradient; } wall { type fixedValue; value uniform (0 0 0); } } // ************************************************** *********************** // the 0/P /*--------------------------------*- C++ -*----------------------------------*\ ========= | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox \\ / O peration | Website: https://openfoam.org \\ / A nd | Version: 8 \\/ M anipulation | \*---------------------------------------------------------------------------*/ FoamFile { version 2.0; format ascii; class volScalarField; object p; } // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // dimensions [0 2 -2 0 0 0 0]; internalField uniform 0; boundaryField { inlet { type fixedValue; value uniform 101325; } outlet { type fixedValue; value uniform 86000; } wall { type zeroGradient; } } // ************************************************** *********************** // the controldict file /*--------------------------------*- C++ -*----------------------------------*\ ========= | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox \\ / O peration | Website: https://openfoam.org \\ / A nd | Version: 8 \\/ M anipulation | \*---------------------------------------------------------------------------*/ FoamFile { version 2.0; format ascii; class dictionary; location "system"; object controlDict; } // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // application pimpleFoam; startFrom startTime; startTime 0; stopAt endTime; endTime 1000; deltaT 0.2; writeControl timeStep; writeInterval 200; purgeWrite 0; writeFormat ascii; writePrecision 6; writeCompression off; timeFormat general; timePrecision 6; runTimeModifiable true; functions { #includeFunc fieldAverage(U, p, prime2Mean = yes) } // ****************** ************************************************** ***** // |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues when simulating nozzle flow with outside region | blais.bruno | SU2 | 4 | March 13, 2024 14:04 |
Pressure drop across a converging nozzle | mjkey | CFX | 16 | July 17, 2019 13:22 |
Sonic flow for exhaust nozzle | beanlee999 | FLUENT | 1 | May 10, 2012 14:34 |
Modelling the Heat flow inside the curing oven | Marios Vlad | CFX | 1 | February 6, 2008 07:11 |
compressible flow in a counterflow nozzle | d.vamsidhar | FLUENT | 0 | November 24, 2005 01:45 |